[HTML][HTML] Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys

M Hashemi, R Alizadeh, TG Langdon - Journal of Magnesium and Alloys, 2023 - Elsevier
Magnesium alloys are of considerable current interest for use as degradable implants due to
their unique properties including biodegradability, biocompatibility, low density and …

[HTML][HTML] Optimizing mechanical properties of magnesium alloys by philosophy of thermo-kinetic synergy: Review and outlook

T Wang, F Liu - Journal of Magnesium and Alloys, 2022 - Elsevier
Although several strategies (including grain refinement, texture adjustment, precipitation
hardening, etc.) have been verified to effectively improve the mechanical properties of …

Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer

R Zheng, JP Du, S Gao, H Somekawa, S Ogata, N Tsuji - Acta Materialia, 2020 - Elsevier
Magnesium (Mg) and its alloys usually show relatively low strength and poor ductility at
room temperature due to their anisotropic hexagonal close-packed (HCP) crystal structure …

[HTML][HTML] Micromechanical response of pure magnesium at different strain rate and temperature conditions: twin to slip and slip to twin transitions

NM della Ventura, P Schweizer, A Sharma, M Jain… - Acta Materialia, 2023 - Elsevier
The strain rate (ε˙) and temperature (T) dependent mechanical response of single crystal
magnesium (Mg) micropillars compressed along the [2¯ 110] direction (a-axis) is …

[HTML][HTML] Achieving high strength and ductility in nitrogen-doped refractory high-entropy alloys

R Wang, Y Tang, Z Lei, Y Ai, Z Tong, S Li, Y Ye, S Bai - Materials & Design, 2022 - Elsevier
Refractory high-entropy alloys (HEAs) usually exhibit high strength but limited ductility. Here,
we report high strength (∼ 1334 MPa) and large ductility (∼ 18.8%) in nitrogen-doped …

Effect of grain size on slip activity in pure magnesium polycrystals

CM Cepeda-Jiménez, JM Molina-Aldareguia… - Acta Materialia, 2015 - Elsevier
The aim of this work is to investigate the effect of grain size on slip activity, a critical issue for
materials design that remains unsolved. Three pure magnesium polycrystals with average …

60 years of Hall-Petch: past to present nano-scale connections

RW Armstrong - Materials Transactions, 2014 - jstage.jst.go.jp
In the early 1950's, Hall1) and Petch2) described their respective measurements made on
iron and steel materials of the polycrystalline grain diameter dependence of the yield stress …

Effect of solutes on strength and ductility of Mg alloys

DF Shi, MT Pérez-Prado, CM Cepeda-Jiménez - Acta Materialia, 2019 - Elsevier
This work investigates the origin of the simultaneous increase in strength and ductility that
takes place in Mg polycrystals alloyed with Al and Zn solutes. With that purpose, twelve …

A combined experimental and crystal plasticity study of grain size effects in magnesium alloys

A Lakshmanan, MT Andani, M Yaghoobi… - Journal of Magnesium …, 2023 - Elsevier
This work presents a method to incorporate the micro Hall-Petch equation into the crystal
plasticity finite element (CPFE) framework accounting for the microstructural features to …

Investigation of grain size and geometrically necessary dislocation density dependence of flow stress in Mg-4Al by using nanoindentation

E Song, MT Andani, A Misra - Acta Materialia, 2024 - Elsevier
Abstract Models for grain size dependence of flow stress typically ignore contributions from
geometrically necessary dislocations (GNDs) in the grain boundary regions. Ashby had …