A continuous cooling transformation (CCT) diagram was developed using thermal
simulation techniques to replicate the coarse-grain heat-affected zone (CGHAZ) of an X80 …

The tensile and Charpy impact properties of four strip samples from two different B-added
low-C ultra-high-strength steel strips (Al-treated and Ti-treated), coiled at two different …

Abstract Effects of thermal ageing on tensile and impact properties of India-specific Reduced
Activated Ferritic-Martensitic (INRAFM) steel (9Cr-1.4 W-0.06 Ta-0.22 V) have been studied …

The mechanical properties and microstructure of reduced activation ferritic/martensitic
(RAFM) steel after austenitizing at 930–1080° C for 30 min and tempering at 760° C for 90 …

Abstract The 9Cr-1Mo steel used in fast breeder reactor is exposed to irradiation during
service which severely affects the dynamic fracture resistance by increasing the ductile to …

Influence of thermal aging (873 K, 5000 h) on microstructure and tensile-plastic flow
behavior of normalized and tempered (N&T) 1.4 W–0.06 Ta IN-RAFM steel is investigated …

Tensile deformation behavior of the heat affected zone (HAZ) of Mod. 9Cr-1Mo weldment
has been characterized. Different microstructural regions (coarse grain, fine grain and inter …

The present study investigates the influence of thermal ageing (873K/5000h) on the
microstructure, tensile-plastic flow behavior, and work hardening parameters of normalized …

Submerged arc welding (SAW) is often the method of choice in pressure vessel fabrication.
This process features high production rates, welding energy and/or welding speed and …

Samples from normalized and tempered modified 9Cr–1Mo steel, were normalized at three
different temperatures and rolled at four different temperatures and subsequently tempered …