The hot deformation behavior of Al-Mg-Si alloys was investigated by isothermal
compression tests in a temperature range from 400° C to 550° C and a strain rate range from …

The hot deformation behavior of a novel Sc, Zr alloyed Al-Zn-Mg-Cu alloy was explored in
the isothermal hot compression test with a temperature range of 300–500° C and a strain …

Abstract Al–Zn–Mg–Cu alloys can be fabricated by a series of thermo-mechanical
processing methods (eg, hot rolling, forging and extrusion), which is able to serve in …

The hot deformation behavior and microstructural evolution of homogeneous annealed
AA7020 aluminum alloy were investigated by isothermal compression tests over the …

A precise constitutive equation is essential to accurately describe the flow behavior of
aluminum alloy in numerical simulation of hot-forming process. In this study, the hot …

Abstract An Al-Zn-Mg-Cu alloy was isothermal compressed at temperatures ranging from
300° C to 450° C with strain rates ranging from 10− 5 s− 1 to 10 s− 1 to study its deformation …

The increasing demand for sustainable manufacturing has revived the interest in solid-state
recycling (SSR) as a promising alternative method for aluminum waste. In this context, chips …

The shear-compression deformation of GH4169 superalloy at 1000–1200° C and 0.01–1 s−
1 was investigated by physical and numerical simulation based on a specific shear …

Abstract In this work, Al 6 Mn phases with various sizes and morphologies were achieved in
homogenized Al–6Mg–0.8 Mn alloys. The homogenized alloys were compressed at 450° C …

To improve the hot working stability of Al–0.5 Mg–0.4 Si–0.1 Cu alloy, isothermal
compression tests were performed at the temperature range of 350–500° C and strain rate of …