This study aims to investigate the deformation mechanisms of an austenite-based duplex Fe–
Mn–Al–C steel at room-temperature through uniaxial tensile tests, strain rate sensitivity and …

Many applications with potential use of high entropy alloys (HEAs) involve thermo-
mechanical processing. The principal aim of this study is to elucidate the deformation …

High entropy alloys (HEAs) have been a new-type of structural materials, which show good
performance in various extreme conditions. In the present study, we systematically …

High temperature deformation behavior of Al 0.2 CoCrFeNiMo 0.5 high entropy alloy was
investigated in fully annealed condition. Microstructural studies were performed using SEM …

Experiments are conducted to investigate the electroslag remelting process of Fe‐(20‐30)
Mn‐(10‐12.0) Al‐(1‐2) C (wt%) steel in a short collar mold using a characteristic silica …

This research deals with predicting the strain hardening behavior and constructing the
processing maps of a lightweight steel over a wide range of temperature. To achieve this …

MP35N medium-entropy alloy with low stacking fault energy (SFE) is widely used in the
biomedical field due to its excellent biocompatibility and mechanical property matching. With …

A balance between the mechanical performance and castability of Ni-based single crystal
superalloys is expected to be achieved by doping with appropriate carbon content. In this …

Understanding the relationship between mechanical twinning and dynamic strain aging
(DSA) in austenitic steels is necessary for steel development. DSA can be manipulated by …

The present study systematically investigated the effect of Si additions from 0 to 4 wt% on the
deformation mechanism of a Fe-0.2 C-6.8 Mn (wt.%) medium Mn steel. The duplex …