Grain boundary engineering (GBE) is considered to be an attractive approach to
microstructure control, which significantly enhances the grain-boundary-related properties of …

A new sulfate bath having ZnSO 4. 6H 2 O, NiSO 4. 6H 2 O, citric acid, and methanol extract
in combination was optimized for the deposition of Zn-Ni electroplating on mild steel. The …

The deposition mechanism of Ni-Co alloys with different cobalt compositions plays an
important role in the preparation and application of Ni-Co alloys by electrodeposition. Cyclic …

Deep-eutectic solvent (DES) was used widely as an eco-friendly and sustainable process in
the zinc (Zn) electroplating in this study. Both the conventional and supercritical carbon …

The nickel electrodeposition coating onto a stainless steel AISI 304 substrate was performed
in a sulfate–chloride bath using cyclic voltammetry, chronoamperometry, and linear scan …

Nickel-based coatings offer excellent corrosion, wear resistance, and mechanical strength,
and can be further improved with additives, making them ideal for harsh environments like …

Abstract In this study, Zn–Ni–Cu and Zn–Ni–Cu–TiB2 coatings were deposited using high-
velocity oxy-fuel (HVOF) thermal spray technique on a mild steel substrate. Corrosion tests …

In the present work, Titanium oxide nanoparticles (TiO 2 NPs) were synthesized by the
solution combustion method for use in Riboflavin (RF) sensor applications. Titanium (III) …

Graphene nanoplatelets (Gr) as fillers for alloy composite coatings has increased due to
their remarkable high aspect ratio and distinctive plate-like structure. Piping, condensers …

An investigation of the magnetic flux effect with an intensity of up to 1 T on the electroplating
of Zn–Ni alloys was performed, taking into consideration the resistance and configuration of …