Abstract Properties such as high hardness, low density, and high elastic modulus have
made SiC ceramics proper choices for a variety of industrial applications. However …

Abstract Properties such as high hardness, low density, high melting temperature and high
modulus of elasticity have made SiC suitable for a wide range of high-temperature and …

TiC particle (TiC p) reinforced Ti6Al4V (TiC p/Ti6Al4V) titanium matrix composites with
coated powders (TiC:< 10 μm) and small-sized (TiC: 25–45 μm), medium-sized (TiC: 45–75 …

In this work, we systematically studied the effects of powder characteristics (B 4 C, TiC and
Si powders) on the existential form of toughening phases (SiC and TiB 2) as well as the …

Abstracts The ceaseless exploration for the improvement of ceramic materials has created a
lot of techniques, all aimed at producing ceramic materials that can withstand environmental …

Ceramics offer several attractive properties of industrial relevance, eg high strength and
hardness, low thermal conductivity, and chemical inertness in critical environments. There is …

In this investigation, the in-situ TiC particles reinforced Ni-based composite coatings were
produced by plasma spray welding with mixed powders (NiCrBSi+ Ti+ NiCr–Cr 3 C 2). Their …

The effect of TiB 2 content on mechanical properties of silicon carbide–titanium diboride
ceramic composites was studied. The hardness of the ceramics decreased from 27.8 GPa …

The attractive physical and mechanical properties of SiC ceramics have attracted the
attention of many researchers. In recent years, attempts have been made to use various …

The yttrium-segregation-dependent phase partitioning and residual stress development that
influence both the aging and the fracture behaviour in 3Y-TZP bioceramics were studied by …