Structure, mechanical and tribological properties of self-toughening TiSiN/Ag multilayer coatings on Ti6Al4V prepared by arc ion plating
C Dang, J Li, Y Wang, J Chen - Applied Surface Science, 2016 - Elsevier
Abstract The TiSiN/Ag multilayer coatings deposited on Ti6Al4V alloy substrate using the
multi-arc ion plating system. All multilayer coatings had a same total thickness of about 2.5 …
multi-arc ion plating system. All multilayer coatings had a same total thickness of about 2.5 …
Continuously growing ultrathick CrN coating to achieve high load-bearing capacity and good tribological property
Z Li, Y Wang, X Cheng, Z Zeng, J Li, X Lu… - … applied materials & …, 2018 - ACS Publications
Continuous growth of traditional monolayer CrN coatings up to 24 h is successfully achieved
to fabricate ultrathickness of up to 80 μm on the 316 stainless steel substrate using a …
to fabricate ultrathickness of up to 80 μm on the 316 stainless steel substrate using a …
Improvement of solid particle erosion and corrosion resistance using TiAlSiN/Cr multilayer coatings
Abstract The TiAlSiN/Cr multilayer coatings with different thicknesses of chromium (Cr)
layers were designed and prepared by high power impulse magnetron sputtering (HiPIMS) …
layers were designed and prepared by high power impulse magnetron sputtering (HiPIMS) …
Characterizing deformation behaviour of an oxidized high speed steel: Effects of nanoindentation depth, friction and oxide scale porosity
In the present paper, a systematic study on the deformation behaviour of an oxidized high
speed steel (HSS) during nanoindentation has been conducted. Specimens cut from a HSS …
speed steel (HSS) during nanoindentation has been conducted. Specimens cut from a HSS …
Toward high load bearing capacity and corrosion resistance Cr/Cr2N nano-multilayer coatings against seawater attack
X Guan, Y Wang, Q Xue, L Wang - Surface and coatings technology, 2015 - Elsevier
Cr/Cr 2 N nano-multilayer coatings with varied individual thickness of Cr 2 N layer were
fabricated on 316L stainless steel substrates by multi-arc ion plating system. The evolutions …
fabricated on 316L stainless steel substrates by multi-arc ion plating system. The evolutions …
Microstructural effects on indentation failure mechanisms in TiN coatings: Finite element simulations
Titanium nitride (TiN) coatings offer improvements in resistance to wear and environmental
degradation. TiN films produced by physical vapour deposition tend to exhibit columnar …
degradation. TiN films produced by physical vapour deposition tend to exhibit columnar …
Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: experiments and first-principles calculations
In this paper, the Ti-6Al-4V (TC4) alloy specimens pre-coated with Ti-Cu-Al multilayer films
were plasma nitrided at different temperatures (673K-823K), and their microstructure and …
were plasma nitrided at different temperatures (673K-823K), and their microstructure and …
A new method to improve the tribological performance of metal nitride coating: A case study for CrN coating
J Zhang, Z Li, Y Wang, S Zhou, Y Wang, Z Zeng, J Li - Vacuum, 2020 - Elsevier
Taking CrN coating as an example, a new refinement method was performed to improve the
tribological performance of metal nitride coatings in the low temperature thermal cycling in …
tribological performance of metal nitride coatings in the low temperature thermal cycling in …
Contact fatigue behavior of PVD-coated hardmetals
E Tarrés, G Ramírez, Y Gaillard… - International Journal of …, 2009 - Elsevier
There is an increasing usage of PVD-coated hardmetals in applications where contact loads
of cyclic nature between curved surfaces are common, eg cold forming tools and machine …
of cyclic nature between curved surfaces are common, eg cold forming tools and machine …
Investigation of the fracture of very thin amorphous alumina film during spherical nanoindentation
Thin amorphous alumina layers (10 to 40 nm thick) are processed on sputtered aluminum
thin film (500 nm) by atomic layer deposition (ALD) at low temperature (85° C). Global …
thin film (500 nm) by atomic layer deposition (ALD) at low temperature (85° C). Global …