Aluminum alloys are well known light-weight alloys and very interesting materials to
optimize the strength/weight ratio in order to reduce automotive vehicle weight, fuel …

The residual-stress induced failure of Ti-6Al-4V/Si 3 N 4 joints brazed with two different Si 3
N 4 ceramics possessing different intrinsic properties was elucidated through experimental …

Garnet-based solid-state electrolytes are considered crucial candidates for solid-state Li
batteries due to their high Li+ conductivity and nonflammability; however, poor interfacial …

Silicon carbide particles have been introduced as reinforcements in a commercially
available active metal braze filler alloy (Incusil ABA, Wesgo Metals) used for the joining of …

A novel particle reinforced AgCu composite filler (abbreviated as AgCu C filler) was
developed by introducing nano-Si 3 N 4 particles and micron-Ti particles into AgCu powder …

Porous Si 3 N 4 was brazed to Invar alloy in this study, and Ag-Cu-Ti/Cu/Ag-Cu multi-layered
filler was designed to inhibit the formation of Fe 2 Ti and Ni 3 Ti intermetallic compounds …

The Si3N4 ceramic was joined to 42CrMo steel using Ag–Cu–Ti+ Mo composite filler. Effect
of Mo particles content on the microstructure and mechanical properties of the joints were …

Abstract Porous Si 3 N 4 (P–Si 3 N 4) ceramic was successfully joined to Invar alloy using a
Cu–Ti active brazing alloy for the first time. The interfacial reactions between the Cu–Ti filler …

Ag–Cu–Ti+ SiCp composite filler was used as brazing material to join Si3N4 ceramic. Effects
of the content of Ti (4–10wt.%) and SiC particles (0–15vol.%) on properties and …

In this manuscript, Al 2 O 3 ceramic and TiAl alloy were brazed with Ag-Cu-Ti based
composite fillers containing B powder additive. The effects of B content, Ti content, and the …