Ni-based cladding coatings with WC weight percentage of 5%, 7.5% and 10% were
prepared on the surface of 0Cr17Ni12Mo2 stainless steel by Raycus RFL-C1000 laser, and …

The effects of supersonic fine particle bombardment (SFPB) on the wear properties and
surface integrity of 304 stainless steel were investigated. Moreover, the impact of different air …

This study aims at the development of composite surface on austenitic stainless (AISI 304
stainless steel) by laser surface alloying with WC and Co in the weight ratio of 4: 1. Laser …

Flywheel is used to store rotational energy and subjected to more stress and strain. The
selection of material have a vital role in the fabrication of flywheel. In this paper we are using …

摘要为增强304 不锈钢表面性能, 利用激光熔覆技术在其表面制备了TiC 颗粒增强Fe
基复合涂层, 研究了激光功率对涂层几何特征, 组织特征及硬度的影响规律和原因 …

The authors analyze peculiarities of the phase formation and morphology of the titanium
carbohydride coatings deposited on the steel substrates by means of short pulse selective …

Sažetak One of the key challenges in robotic remote laser 3D processing (RL3DP) is to
achieve high accuracy for the laser's working trajectory relative to the features of the …

This paper outlines the experimental exploration of cutting forces produced during ball-end
milling of multi-layered metal materials manufactured by the laser engineered net shaping …

Multilayer metal materials are increasingly used by tool shops in the production of transfer
tools for sheet-metal forming. In research, it is found that during the machining of these …

Sažetak When machining difficult-to-cut metal materials often used to make sheet metal
forming tools, excessive cutting force jumps often break the cutting edge. Therefore, this …