Structure and electrical performance of Mn1. 5− 0.5 xCo0. 9− 0.3 xNi0. 6− 0.2 xCuxO4 NTC ceramics prepared by heterogeneous precipitation

K Xiong, SX Zhao, DF Li, HQ Bao, CW Nan - Journal of alloys and …, 2014 - Elsevier
The spinel-structured ceramics of Mn 1.5− 0.5 x Co 0.9− 0.3 x Ni 0.6− 0.2 x Cu x O 4
negative temperature coefficient (NTC) thermistors were fabricated by heterogeneous …

EM simulator analysis of optimal performance thick-film segmented thermistors versus material characteristics selection

V Maric, MD Lukovic, L Zivanov… - IEEE Transactions …, 2008 - ieeexplore.ieee.org
In this paper, an alternative approach to the analysis of thick-film segmented negative
temperature coefficient thermistors based on the use of a commercial electromagnetic …

Modeling and simulation of NTC thick film thermistor geometries

OS Aleksić, BM Radojčić, RM Ramović - Microelectronics international, 2007 - emerald.com
Purpose–The paper aims to focus on thick film planar thermistors. Design/methodology/
approach–Thick film planar thermistors such as rectangular, sandwich, multilayer …

Thermal diffusivity and electron transport properties of NTC samples obtained by the photoacoustic method

SM Savić, OS Aleksić, MV Nikolić, DT Luković… - Materials Science and …, 2006 - Elsevier
Thermal diffusivity and electron transport parameters of sintered NTC samples were
determined by the photoacoustic (PA) technique. Powder mixtures composed of MnO, NiO …

A low-power thermal-based sensor system for low air flow detection

AKM Arifuzzman, MR Haider, DB Allison - Analog integrated circuits and …, 2016 - Springer
Being able to rapidly detect a low air flow rate with high accuracy is essential for various
applications in the automotive and biomedical industries. We have developed a thermal …

Three-Axis' heat loss anemometer comprising thick-film segmented thermistors

SO Aleksic, NS Mitrovic, Z Nikolic… - IEEE Sensors …, 2019 - ieeexplore.ieee.org
NTC thick-film segmented thermistors were used as anemometer sensing devices. They
were screen printed of thick-film thermistor paste based on modified NiMn 2 O 4 fine powder …

A novel approach to modeling and simulation of NTC thick-film segmented thermistors for sensor applications

OS Aleksic, VD Maric, LD Zivanov… - IEEE Sensors …, 2007 - ieeexplore.ieee.org
This paper describes the design, modeling, simulation, and fabrication of thick-film
segmented thermistors. These thermistors were printed on alumina using negative …

Analysis of effects of dielectric and material characteristics on the performance of thick film thermistors using commercial software tools

V Maric, M Lukovic, L Zivanov… - … IEEE Instrumentation and …, 2006 - ieeexplore.ieee.org
In this paper an alternative approach to analysis of NTC thermistors based on the use of
commercial electromagnetic simulator tool is presented. Structure analyzed was a thick film …

Design and simulation of thick film thermistors using commercial simulation tools

V Maric, O Aleksic, L Zivanov - 2006 25th International …, 2006 - ieeexplore.ieee.org
Methods for predicting and analyzing the behavior of NTC thermistors have remained the
same and they typically include accurate measurements of resistance and temperature …

Novel uniaxial anemometer containing NTC thick film segmented thermistors

AB Menicanin, OS Aleksic, MV Nikolic… - 2008 26th …, 2008 - ieeexplore.ieee.org
A novel uniaxial anemometer was created using a NTC thick film segmented thermistor to
measure wind speed and direction. The anemometer operated on the principle of heat loss …