This article reviews original work and important new developments in the field of
deformation behavior of high manganese face-centered cubic γ-Fe alloys. Owing to their …

The stacking fault energy (SFE) is often used as a key parameter to predict and describe the
mechanical behaviour of face centered cubic material. The SFE determines the width of the …

A new class of austenitic steel for automotive applications exhibiting the TWIP (twinning-
induced plasticity) effect, which provides an excellent combination of strength and ductility, is …

The effect of V addition on the microstructure and the tensile behavior of Fe-17Mn-0.45 C-
1.5 Al-1Si-xV TWIP steel was investigated. The V additions contributed to a reduction of the …

In this study in situ neutron diffraction investigations of a fully austenitic medium-Mn steel
enabled key insights into the temperature dependence of the deformation response with a …

The present study found that the work-hardening rate and dislocation density in a twinning-
induced plasticity (TWIP) steel deformed at 373 K and 473 K are comparable to that …

In general, stress-induced martensite (SIM) is frequently employed to enhance the strain
hardening behavior of Ti alloys through a so-called transformation-induced plasticity (TRIP) …

Synchrotron X-ray diffraction was applied to measure the dislocation density of two twinning-
induced plasticity (TWIP) steels with different carbon content but comparable stacking fault …

Transformation induced plasticity (TRIP) assisted lean duplex stainless steels (LDSS)
possess a multi-phase microstructure during deformation due to strain-induced martensite …

Metastable body-centered cubic titanium alloys exhibiting {332}< 113> twinning-induced
plasticity (TWIP) have attracted extensive attention owing to their remarkable strain …