The dissimilar material joining of aluminum and titanium alloys is recognized as a challenge
due to the significant differences in the physical, chemical, and metallurgical properties of …

This article provides a comprehensive review of the advancements made in the diffusion
bonding of titanium and its alloys to other advanced materials such as aluminium, stainless …

Abstract Hybrid Additive Manufacturing (HAM) is a production strategy enhancing the
flexibility of the already versatile Additive Manufacturing (AM) techniques. AM of Ti6Al4V, on …

The microstructural and mechanical properties of ultrasonic spot-welded (USWed) joints of
AA7072-clad AA7075-T6 alloy to galvanized HSLA steel are investigated. The tensile lap …

Diffusion brazing mechanism of two dissimilar alloys WC-CO and AISI 4145 steel by
RBCuZn-D filler metal with different bonding times of 1, 2.5, 5, 7.5, 10 and 12.5 min was …

Diffusion bonding (DB) is a novel joining process exploiting diffusion of atoms on faying
surfaces when appropriate values of governing parameters such as temperature, pressure …

Abstract To achieve Ti/Mg bimetallic composite with high strength and metallurgical bonding
interface, Al interlayer and Zn/Al composite interlayer were used to prepare TC4/AZ91D …

Diffusion bonding was employed to join AISI 321 stainless steel to Ti–6Al–4V titanium alloy
via Cu–Zn foil as the interlayer. The influence of bonding time (30, 45 and 60 min) at 900° C …

Thermal spray assisted transient liquid phase (TLP) bonding of Ti− 6Al− 4V to Al2024 alloys
was investigated, where the interlayer was 80 µm Babbitt thermal spray coat on Al substrate …

The study results of an overlap welded joint of Commercially Pure Titanium Grade 4 (CP Ti)
and Aluminum-Copper Alloy 2XXX series (AA2024) obtained by laser welding without …