Evaluation of microstructural, mechanical, and tribological characteristics of Ni-BW-SiC electroless composite coatings involving multi-pass scratch test

V Nemane, S Chatterjee - Materials Characterization, 2021 - Elsevier
A comprehensive study on the fabrication and characteristics of electroless Ni-BW-SiC
composite coating is presented. The role of tungsten in Nisingle bondB matrix in improving …

Effect of tungsten, molybdenum, nickel and cobalt on the corrosion and wear performance of Fe-based metallic glass coatings

AA Burkov, PG Chigrin - Surface and Coatings Technology, 2018 - Elsevier
The set of amorphous alloys with different contents of metals (W, Mo, Co and Ni) were
obtained onto the AISI 1035 steel surface by electrospark deposition in crystalline granules …

Optimization of pulsed electro co-deposition for Ni-B-TiN composites and the variation of tribological and corrosion behaviors

F Doğan, M Uysal, H Algül, E Duru, H Akbulut… - Surface and Coatings …, 2020 - Elsevier
In this study, novel Ni-B-TiN metal matrix composite (MMC) coatings were successfully
deposited using a nickel Watts bath containing TiN nanoparticles by Pulse Electrodeposition …

[HTML][HTML] Uncovering the influence mechanism of nonmetallic atoms on the mechanical properties of Ni3Co alloy

Y Du, X Yuan, P Liu, M Long, D Chen - Journal of Materials Research and …, 2023 - Elsevier
The introduction of solute atoms has a critical effect on the mechanical properties of nickel-
cobalt alloys. In the present study, we first prepare the Ni 3 Co alloy coating by …

Scale-up of Co–Ni cathodes produced from spent Ni–Cd batteries for hydrogen production in an oxy-hydrogen gas cell

OV de la Cruz, RM Luna-Sánchez, G Trejo… - International Journal of …, 2023 - Elsevier
Abstract Ni (II) and Co (II) ions are recovered from real leached positive electrodes of spent
Ni–Cd batteries, and subsequently co-deposited on A36 carbon steel using direct and …

Investigation of electrochemical deposition of Fe-P alloys on polycrystalline platinum from an alkaline bath

MM Brito, MG Zacarin, RA Arruda, EP Barbano… - Thin Solid Films, 2020 - Elsevier
The electrodeposition process of the Fe-P alloy on platinum substrate was investigated at
room temperature using a moderately alkaline bath containing FeCl 3, NaH 2 PO 2 and Na 3 …

[HTML][HTML] Properties of nanocrystalline CuAg foil prepared via electrodeposition

KH Lee, W Kong, M Han, JH Ahn, SZ Han… - Journal of Alloys and …, 2021 - Elsevier
In this study, we fabricated nanocrystalline CuAg foils with a thickness of 40 µm using an
electrodeposition method, and evaluated its structure and properties. Using an appropriate …

[HTML][HTML] Fabrication and characterization of corrosion resistant amorphous-nanocrystalline alloy Ni49Co3Mo22B26 by galvanostatic deposition

MF Yasir, M Sundaram - Journal of Manufacturing Processes, 2024 - Elsevier
Amorphous materials have unique physical properties but have limited practical use due to
their low ductility and thermal instability. A quaternary Ni 49 Co 3 Mo 22 B 26 amorphous …

[HTML][HTML] Electrodeposited Ni–Co–B coatings: Preparation and evaluation of its wear resistance

L Li, H Hu, Y Du, M Long, H Duan, D Chen - Journal of Materials Research …, 2024 - Elsevier
Ni–Co–B coating was electrodeposited in sulfate bath with dimethylamine borane (DMAB)
as reducing agent. The experiment explored the effect of DMAB concentration (C DMAB, 1 …

Investigation of Structural and Magnetic Properties of Co, Ni and CoNi Alloy Thin Films by Fabricated with Electrodeposition

R Özdemir, CA Korkmaz - El-Cezeri, 2022 - dergipark.org.tr
The production of nanoparticles as thin film coating performed with electrodeposition
method is easier and cheaper than other methods. Because, thin film production can be …