In the current study, the surface of AISI D2 steel was coated with the powder blends of ferro-
vanadium (Fe-V) and ferro-chromium (Fe-Cr). The coatings were performed using a thermo …

The goal of the current work was to prepare a self-lubricating composite coating NiCrAlY/Cr
3 C 2 (NiCr)/Cu/MoO 3 on GH4169 alloy substrate by laser cladding with hard phase Cr 3 C …

Laser engineered net shaping (LENS™) allows for the deposition of novel hybrid materials
with microstructures composed of solid solution and precipitation strengthened metallic …

Ni 3 Al-based composites with different Cr 3 C 2 contents were fabricated by the hot isostatic
pressing (HIP) technique. The microstructure, phase constitution, and tribological properties …

Using Cr7C3/Ni3Al alloyed powder and Cr3C2/Ni3Al mixed powder, laser cladding was
carried out to prepare a Cr7C3 reinforced Ni3Al composite cladding layer. The …

Microstructural and microchemical characterization of Ni-Ta-Al-Cr-C coating layer, deposited
by Gas Tungsten Arc Welding (GTAW) method on AISI 310 is presented. The layer was …

Abstract Fe-25Cr-5Mo-0.82 C alloy was synthesized in an arc furnace in high purity argon
atmosphere and crystallized on water-cooled copper mould. The cross section of the ingot …

In this study, the formation of chromium carbide layer on SUJ 2 tool steel substrate as a
surface treatment by thermo reactive diffusion process with pack cementation method was …

This work contains a detailed description of the influence of continuous heating from as-
quenched state on the microstructure development in the 17-4PH steel. The temperature …

Spot welding is one the resistance welding methods that has been used widely in
manufacturing of machinery components because it does not require filler metals, fast …