The strategy of the strength-ductility balance of aluminum matrix composites (AMCs)
reinforced with nano-and micro-SiC particles via deformation-driven metallurgy was …

The intrinsic correlation between dynamic precipitation and Dynamic Recrystallization
(DRX) in a rare earth (RE)-free engineering Mg-4Sn-3Al-1Zn (TAZ431, wt.%) magnesium …

Synthesis of aluminium based metal matrix composites by in-situ reaction is considered as
an alternative method for production of high quality metal matrix composites. In-situ …

Ductility collapse is a stubborn issue for developing high-strength Al matrix composites
reinforced with carbon nanotubes (CNTs). In order to solve this problem, here we …

In this study, the hybrid aluminum matrix composite reinforced with TiB 2 and TiAl 3 particles
was fabricated by in situ synthesis. Hot compression tests were performed at a deformation …

The 6061 alloy matrix composites reinforced with 10 wt.% and 15 wt.% of SiC nanoparticles
with an average diameter of~ 500 nm were hot extruded in strip shape from ball milled …

Continuous dynamic recrystallization (cDRX) is an effective way to refine the microstructures
of materials with high stacking fault energies during their hot working. However …

In 7xxx series aluminum alloys, the constituent large and small second-phase particles
present during deformation process. The fraction and spatial distribution of these second …

Hot-deformation behaviors and mechanisms below γ′ solvus of U720LI with fine-grained
microstructure and high volume fractions of γ′ phases were studied. MTS hot-compressed …

Abstract The TiB 2• TiAl 3/2024Al composite fabricated by in situ reaction method was
subjected to multidirectional forging (MDF) and the effects of temperature and pass number …