Typically, polymeric materials experience material degradation and damage over time in
harsh environments. Improved understanding of the physical and chemical processes …

H2 permeation in peroxide-crosslinked EPDM blended with carbon black (CB) and silica
fillers was studied at pressures ranging from 1.2 MPa to 90 MPa via the volumetric analysis …

A high-performance H2 gas sensor system based on capacitive electrodes and a volumetric
analysis technique were developed. Coaxial capacitive electrodes were fabricated by …

The physical and mechanical properties and structural condition of flexible graphite foils
produced by processing natural graphite with nitric acid, hydrolysis, thermal expansion of …

In Gasket Assembly, a deformable gasket must be aligned and pressed into a narrow
channel. This task is common for sealing surfaces in the manufacturing of automobiles …

Electronic Enclosures, Housings and Packages considers the problem of heat management
for electronics from an encasement perspective. It addresses enclosures and their …

Nitrogen permeability of graphite foil (GF) based on expandable graphite with different
oxidation degrees was measured. Expandable graphite was obtained by the chemical …

Non-asbestos fiber gasket material is a ternary composite mainly composed of fibers,
rubber, and fillers. Due to the carcinogenic risks associated with asbestos fibers, research …

Silicon rubber gaskets are commonly used in many industries for low pressure sealing
conditions only. The research studies about the sealing performance improvement of a …

Gaskets are extensively utilized in compound and petrochemical enterprises like refineries
for most highpressure framework applications such as channelling frameworks, joint …