A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application
In this review article, microstructure and mechanical behavior of the dissimilar welded joint
(DWJ) between ferritic-martensitic steel and austenitic grade steel along with its application …
(DWJ) between ferritic-martensitic steel and austenitic grade steel along with its application …
Ferritic-martensitic steels for fission and fusion applications
C Cabet, F Dalle, E Gaganidze, J Henry… - Journal of Nuclear …, 2019 - Elsevier
Compared to austenitic stainless steels, largely employed in the early fission reactors, high
chromium Ferritic/Martenstic (FM) steels, developed since the first half of the 20th century for …
chromium Ferritic/Martenstic (FM) steels, developed since the first half of the 20th century for …
[HTML][HTML] Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion
The CoCrFeMnNi high-entropy alloy is a promising candidate for metal additive
manufacturing. In this study, single-layer and multi-layer builds were produced by laser …
manufacturing. In this study, single-layer and multi-layer builds were produced by laser …
Microstructural characteristics and crack formation in additively manufactured bimetal material of 316L stainless steel and Inconel 625
This research illustrates the rationale of adopting a preferred printing sequence by
examining crack generation predominated by resultant interfaces and microstructural …
examining crack generation predominated by resultant interfaces and microstructural …
Weldability of a high entropy CrMnFeCoNi alloy
High-entropy alloys are unique alloys in which five or more elements are presented all in
high concentrations. To determine its potential as a structural alloy, a model face-centered …
high concentrations. To determine its potential as a structural alloy, a model face-centered …
Microstructure anomaly during welding and its influence on the mechanical properties of dissimilar weldments of P92 martensitic steel and AISI 304L austenitic …
In this investigation, microstructural characteristics, mechanical properties, and residual
stress magnitude of dissimilar weld joints (DWJs) between creep strength enhanced ferritic …
stress magnitude of dissimilar weld joints (DWJs) between creep strength enhanced ferritic …
Microstructures and mechanical properties of a welded CoCrFeMnNi high-entropy alloy
The response of the CoCrFeMnNi high-entropy alloy to weld thermal cycles was
investigated to determine its applicability as an engineering structural material. Two …
investigated to determine its applicability as an engineering structural material. Two …
Microstructure and wear behavior of mechanically alloyed powder AlxMo0. 5NbFeTiMn2 high entropy alloy coating formed by laser cladding
Z Gu, S Xi, P Mao, C Wang - Surface and Coatings Technology, 2020 - Elsevier
High entropy alloys (HEAs) is a newly wear-resistant material with multi-component
structures of equal or near equal ratio. The tensile strength of pure Al is one fifth of the low …
structures of equal or near equal ratio. The tensile strength of pure Al is one fifth of the low …
Investigation on joining P91 steel and Incoloy 800HT through gas tungsten arc welding for Advanced Ultra Super Critical (AUSC) power plants
The present study focuses on dissimilar metal weld (DMW) of P91 ferritic-martensitic steel
and Incoloy 800HT. The DMW was made nickel-based filler ERNiCrCoMo-1 filler using …
and Incoloy 800HT. The DMW was made nickel-based filler ERNiCrCoMo-1 filler using …
Study on narrow gap welding of martensitic grade P92 and austenitic grade AISI 304L SS steel for ultra-supercritical power plant application
The present work investigated the microstructural feature, mechanical properties, and
residual stress variation for the dissimilar welded joints (DWJs) of P92 and AISI 304L steel …
residual stress variation for the dissimilar welded joints (DWJs) of P92 and AISI 304L steel …