Investigation of the effects of surface oxide layer on wear and corrosion in NiTi alloys: A mechanical and chemical perspective
E Altas - Science of Sintering, 2024 - doiserbia.nb.rs
Nickel-Titanium (NiTi) alloys are widely applied in biomedical and industrial domains,
mainly because of their unique superelastic characteristics and biocompatibility. However …
mainly because of their unique superelastic characteristics and biocompatibility. However …
An investigation of the effect of cryo-cooling on natural frequency and wear properties of ageable Al alloys
In this study, the influence of the cryogenic cooling on the natural frequency and wear
behaviors of the three different aluminum alloys of AA2024, AA6061 and AA7075 were …
behaviors of the three different aluminum alloys of AA2024, AA6061 and AA7075 were …
An experimental investigation on the mechanical and wear responses of lightweight AlSi10Mg components produced by selective laser melting: Effects of building …
M Han, S Kaşıkcıoğlu, B Ergene, G Atlıhan… - Science of …, 2024 - doiserbia.nb.rs
Additive manufacturing (AM) technology is a game-changer that allows one to produce parts
with intricate geometry that have high specific strength despite having low weight. In this …
with intricate geometry that have high specific strength despite having low weight. In this …
Enhanced microstructural and mechanical properties of Alumix 13 matrix hybrid composites reinforced with B4C and SiC
U Taşcı - Science of Sintering, 2024 - doiserbia.nb.rs
This study produced B4C and SiC reinforced hybrid/composite samples using powder
metallurgy with pre-alloyed Alumix 13 matrix (Al-4.5% Cu-0.5% Mg-0.05% Si). B4C and SiC …
metallurgy with pre-alloyed Alumix 13 matrix (Al-4.5% Cu-0.5% Mg-0.05% Si). B4C and SiC …
Examining The Phase Formation of Aging and Shallow Cryogenic Process Applied to Aluminum Alloys with Thermal Analysis
G Altuntaş, B Bostan - Gazi University Journal of Science Part C …, 2024 - dergipark.org.tr
In this study, cryogenic treatment was applied to the 7*** series alloy, which is one of the
aluminum alloys frequently used in the aviation and space industry, after the retrogression …
aluminum alloys frequently used in the aviation and space industry, after the retrogression …
A Research on the Electrical Conductivity of Hypereutectic Al-Si Compacts and B4C added Composites Produced by Conventional, Microwave and Spark Plasma …
O Melika - 2024 - preprints.org
In the present study, hypereutectic Al-Si alloy compacts and Al-Si/B4C composites were
produced by conventional, microwave and spark plasma sintering techniques. The effects of …
produced by conventional, microwave and spark plasma sintering techniques. The effects of …