On the potential of aluminum crossover alloys
For almost a century commercial aluminum alloys were developed and optimized for high
performance in a specific and narrow range of application, which commonly coincides with …
performance in a specific and narrow range of application, which commonly coincides with …
Effect of cold rolling on nucleation, growth and coarsening of S-phase precipitates in Al-Cu-Mg alloy (AA2024): From heterogeneous nucleation to homogeneous …
The effect of cold rolling on the precipitation kinetics of the hardening phase has been
studied in industrial AA2024. Due to the relatively simple precipitation sequence and the use …
studied in industrial AA2024. Due to the relatively simple precipitation sequence and the use …
Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys
The influence of Zn and/or Ag additions on the microstructure and properties of Al-Mg based
alloys has been investigated. In the as cast condition, β-Al 3 Mg 2 was dominated in Al-5 …
alloys has been investigated. In the as cast condition, β-Al 3 Mg 2 was dominated in Al-5 …
The coupling influences and corresponding mechanisms of high efficiency thermal-magnetic treatments on the dimensional stability of Al-Cu-Mg alloy
Y Song, W Du, L Zhao, L Zeng, W Liu, Y Chen… - Journal of Alloys and …, 2022 - Elsevier
Abstract Al-Cu-Mg alloys are widely utilized as a key component of gyroscope navigation
systems, since their dimensional stability under different service environments (eg, thermal …
systems, since their dimensional stability under different service environments (eg, thermal …
[HTML][HTML] Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys
Abstract Al-Zn-Mg alloys stand among the strongest Al alloys due to the interaction of
Guinier-Preston (GP) zones and η′ precipitates with dislocations. Understanding the …
Guinier-Preston (GP) zones and η′ precipitates with dislocations. Understanding the …
On the impact of using alumina nanoparticles and initial aging on the microstructure and mechanical properties of the AA1050/AA2024 nanostructure composite …
In this research, AA1050/AA2024 layered composites were created through six cycles of the
ARB process. In this direction, the effect of using the reinforcing nanoparticles and the initial …
ARB process. In this direction, the effect of using the reinforcing nanoparticles and the initial …
Enhanced mechanical properties in an Al-Mg-Cu alloy processed by the combination of cyclic deformation and aging heat treatment
X Chen, O Minho, E Kobayashi - Journal of Alloys and Compounds, 2022 - Elsevier
Aging is a traditional strengthening method used for heat-treatable Al alloys. Cyclic
strengthening has recently received widespread attention as a novel method for alloy …
strengthening has recently received widespread attention as a novel method for alloy …
High-efficient hybrid arc and friction stir additive manufacturing of high-performance Al-Cu-Mg-Ag-Zr alloy: Microstructural evolution and precipitation behaviors with Ω …
Z Qin, X Ma, J Li, Y Zhao, Z Zhang, C Shan… - Journal of Manufacturing …, 2024 - Elsevier
Cost-effective and convenient additive manufacturing technologies are recognized as
suitable alternatives for achieving lightweight aluminum alloy components with dense and …
suitable alternatives for achieving lightweight aluminum alloy components with dense and …
[HTML][HTML] Quantitative evaluation of the effect of Ag-addition on the concurrently-existing precipitation kinetics in the aged Al-Cu-Mg (-Ag) alloys
Abstract Two Al-Cu-Mg (-Ag) aluminium alloys, having the same base composition of Al-5.11
Cu-0.96 Mg-0.58 Mn-0.12 Zr (wt.%) but different Ag contents, 0 and 0.7 Ag (wt.%), and …
Cu-0.96 Mg-0.58 Mn-0.12 Zr (wt.%) but different Ag contents, 0 and 0.7 Ag (wt.%), and …
[HTML][HTML] Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation …
G Bo, Y Wang, M Liu, J Tang, F Jiang, J Teng, G Xiao… - Materials & Design, 2022 - Elsevier
The complex precipitation evolutions of Al-Cu-Mg alloys during both non-isothermal and
isothermal thermal processes have been found to work on their mechanical properties and …
isothermal thermal processes have been found to work on their mechanical properties and …