Phosphate chemical conversion coatings for magnesium alloys: a review

MA Hafeez, A Farooq, A Zang, A Saleem… - Journal of Coatings …, 2020 - Springer
Phosphate chemical conversion (PCC) coatings have been investigated for improving
surface protection of magnesium alloys in aerospace, automobile, electronics, sports goods …

Zinc phosphate conversion coatings on magnesium alloys: A review

NV Phuong, K Lee, D Chang, M Kim, S Lee… - Metals and Materials …, 2013 - Springer
Phosphating is one of the most widely used surface treatments of steels and aluminum due
to its low-cost, easy mass production, good corrosion resistance and good adhesion with …

Review of corrosion-resistant conversion coatings for magnesium and its alloys

XB Chen, N Birbilis, TB Abbott - Corrosion, 2011 - meridian.allenpress.com
The corrosion susceptibility of Mg and its alloys in humid and aqueous environments limits
their widespread application. The performance of several conversion coating technologies is …

Electrochemical corrosion behavior of composite coatings of sealed MAO film on magnesium alloy AZ91D

H Duan, K Du, C Yan, F Wang - Electrochimica Acta, 2006 - Elsevier
Protective composite coatings were prepared on magnesium alloy AZ91D by micro-arc
oxidation (MAO) treatment plus a top coating with sealing agent using multi-immersion …

Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants

KY Chiu, MH Wong, FT Cheng, HC Man - Surface and Coatings Technology, 2007 - Elsevier
Fluoride conversion coating was synthesized on magnesium (Mg) by immersion treatment in
hydrofluoric acid (HF) at room temperature, with the aim of improving the corrosion …

Alternative conversion coatings to chromate for the protection of magnesium alloys

S Pommiers, J Frayret, A Castetbon, M Potin-Gautier - Corrosion Science, 2014 - Elsevier
Abstract Chromium Conversion Coatings (CCCs) are widely used for the protection of
magnesium alloys against the corrosion but this approach is limited due to the toxicity of …

The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings

A Ghasemi, VS Raja, C Blawert, W Dietzel… - Surface and Coatings …, 2010 - Elsevier
Combination of KOH with each of Na2SiO3, Na3PO4 and NaAlO2, formed three different
coating solutions to produce plasma electrolytic oxidation (PEO) coatings on the surface of …

Characterization of calcium-modified zinc phosphate conversion coatings and their influences on corrosion resistance of AZ31 alloy

R Zeng, Z Lan, L Kong, Y Huang, H Cui - Surface and Coatings Technology, 2011 - Elsevier
Two kinds of phosphate conversion coatings, including zinc phosphate coating and zinc–
calcium phosphate coating, were prepared on the surface of AZ31 alloy in phosphate baths …

The effect of epoxy coating containing emeraldine base and hydrofluoric acid doped polyaniline on the corrosion protection of AZ91D magnesium alloy

Y Zhang, Y Shao, T Zhang, G Meng, F Wang - Corrosion Science, 2011 - Elsevier
Corrosion protection of epoxy coatings containing emeraldine base polyaniline (PANI) or
hydrofluoric acid doped PANI on AZ91D magnesium alloy were studied by EIS and Pull-Off …

Effect of current density on the microstructure and corrosion properties of plasma electrolytic oxidation (PEO) coatings on AM50 Mg alloy produced in an electrolyte …

G Rapheal, S Kumar, N Scharnagl, C Blawert - Surface and Coatings …, 2016 - Elsevier
Plasma electrolytic oxidation coatings were produced on AM50 Mg alloy in alkaline
phosphate based electrolyte with montmorillonite clay additives employing current densities …