Polymer foams have low density, good heat insulation, good sound insulation effects, high
specific strength, and high corrosion resistance, and are widely used in civil and industrial …

A non-continuous two-step foaming process was reported to prepare microcellular
epoxy/carbon nanofiber (EP/CNF) composite foams. This approach involved firstly limited …

The ever-increasing demand for carbon fibre reinforced polymers (CFRP) and stringent
environmental legislation have driven the research into recycling and reusing the CFRP …

In this work, we show that mechanically anisotropic short carbon fibre (sCF)-reinforced
epoxy foams with an isotropic cellular structure can be fabricated from liquid foam templates …

Microcellular epoxy/multi-walled carbon nanotube (EP/MWCNT) composite foams loaded
with 2 wt%(mass fraction) of MWCNT were prepared through the free-foaming process (Fre …

The compression‐compression fatigue performance of carbon nanotube (CNT) reinforced
aluminium matrix composite foams (AMCFs) were investigated. The ε‐N curves of AMCFs …

Thermal expansion molding process (TEMP) is a new technology for integrated molding
sandwich composites. However, the development of high‐performance expandable foam …

Hierarchical co-continuous composites were prepared by impregnation of a deformed bed of
expanded polystyrene granules with epoxy resin. The composite structure comprises a …

Multilayered epoxy/multiwalled carbon nanotube (EP/MWCNT) composite foams with a
density of 0.713 g/cm3 were prepared through the chemical foaming of laminated epoxy …

Silicone foam (SF) is a porous silicone rubber with a lower density, higher elasticity, and
good thermal stability. In this work, we selected aluminum spheres and carbon fiber (CF) as …