Mid infrared sensing structure based on a metal–insulator–metal waveguides with a triangular-shaped resonator

YM Tan, CTC Chao, MRR Kooh, HJ Huang… - Optics …, 2022 - Elsevier
We designed a high sensitivity plasmonic sensor based on a metal–insulator–metal bus
waveguide coupled with a triangular ring-shaped resonator (TRSR) containing silver …

Phonon and electron transport through Ge2Sb2Te5 films and interfaces bounded by metals

J Lee, E Bozorg-Grayeli, SB Kim, M Asheghi… - Applied Physics …, 2013 - pubs.aip.org
While atomic vibrations dominate thermal conduction in the amorphous and face-centered
cubic phases of Ge 2 Sb 2 Te 5, electrons dominate in the hexagonal closed-packed (hcp) …

Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method

PN Vinod - Journal of Materials Science: Materials in Electronics, 2011 - Springer
The specific contact resistance of the screen-printed Ag contacts in the silicon solar cells has
been investigated by applying two independent test methodologies such as three-point …

Electrical and microstructural analysis of contact formation on lightly doped phosphorus emitters using thick-film Ag screen printing pastes

V Shanmugam, J Cunnusamy… - IEEE Journal of …, 2013 - ieeexplore.ieee.org
Screen printing of the metallization of phosphorus diffused emitters is a well-established
process for industrial silicon wafer-based solar cells. Previously, screen printed silver pastes …

Simultaneously-doping of HfO2 thin films by Ni with sputtering technique and effect of post annealing on structural and electrical properties

A Akkaya, O Kahveci, B Şahin, E Ayyıldız - Physica B: Condensed Matter, 2023 - Elsevier
This article reports a detailed structural and electrical characterization study of Ni: HfO 2
dielectrics grown by rf and dc sputtering and variations in the rapid thermal annealing …

Correlation between the open-circuit voltage and recombination loss at metal-silicon interfaces of crystalline silicon solar cells

MS Jeong, KH Min, S Choi, MG Kang, KT Jeong… - Solar Energy Materials …, 2020 - Elsevier
For screen-printed silicon solar cells, optimization of the contact characteristics between the
front metal electrode and silicon is very significant for realizing high efficiency. As technology …

Reduced graphene oxide decorated CuO@ NiO nanocomposite and their improved photosensitive activity for photodetection applications

E Arulkumar, T Sethuramachandran - Optical Materials, 2024 - Elsevier
In our proposed work, pure rGO and CuO@ NiO/rGO (CNR) nanocomposites (NCs) with
different ratios of CuO@ NiO: rGO (90: 10, 75: 25 and 50: 50) were synthesized and …

Porous Si based Al Schottky structures on p+-Si: a possible way for nano Schottky fabrication

M Gülnahar, T Karacali, H Efeoğlu - Electrochimica Acta, 2015 - Elsevier
This paper presents the results of a comparison research between the Al/p-Si/Al, Al/p+-Si/Al
and Al/PS/p+-Si/Al devices. The current transport mechanism of an Al/por-Si/p+-Si/Al …

The electrical and microstructural properties of electroplated screen-printed Ag metal contacts in crystalline silicon solar cells

PN Vinod - RSC advances, 2013 - pubs.rsc.org
In the present study, electrical and microstructural properties of electroplated screen-printed
Ag metal contacts in crystalline silicon solar cells have been investigated. The metal …

Electrical performance in iron-passivated porous silicon film

M Rahmani, A Moadhen, MA Zaïbi, A Lusson… - Journal of alloys and …, 2009 - Elsevier
The electrical properties in iron-passivated porous silicon (PS: Fe) with stable optical
properties were studied. Iron is incorporated in porous silicon (PS) by impregnation method …