The review is concerned with the use of miniature specimens to identify the
mechanical/creep properties of metals and alloys. It is not intended to consider the …

The small punch test (SPT) was developed for situations where source material is scarce,
costly or otherwise difficult to acquire, and has been used for assessing components with …

An assessment of the true stress–true strain relationship has been done by means of tensile
and small ball punch tests on austenitic and tempered martensitic steel at room temperature …

Small punch (SP) tests have been performed at room temperature on round specimens with
six kinds of thicknesses. Experimental results show that the SP energy, the fracture strain …

The exposure of structural materials to the environment in nuclear power plants leads to
aging through thermal and/or irradiation effects. One of the consequences of this aging is the …

The objective of the final small punch test (SPT) is to determine the fracture properties of
materials, such as fracture toughness, when not enough material is available for the conduct …

The small punch (SP) testing method has been used to assess the reliability of industrial
facilities such as fusion reactor structures and power-generation systems. Conventional SP …

Small punch creep tests were carried out on four different micro zones in P92 steel welded
joint: base metal, welded metal, fine grain heat affected zone and coarse grain heat affected …

分析在热轧低碳含锰钢板上观察到的表面带状组织, 讨论了带状组织形成的原因和预防方法.
实验测定了厚度为8mm 与5mm 热轧钢板冷弯时表面的局部相对伸长, 通过实验结果说明表面带 …

The hydrogen embrittlement (HE) behaviors of structural materials used to handle hydrogen
must be tested at their use environments. In this study, an in-situ small punch (SP) test …