The present review describes approaches to the preparation of powder formulations for
production of calcium phosphate ceramic materials. In order to mold semifinished powder …

Methods that are used in regenerative medicine rely on the inherent ability of living
organisms to regenerate their tissue. If the size (volume) of a defect exceeds some critical …

Stereolithography has emerged as a recent method in fabricating complex structures with
high accuracy. Components using resin have poorer properties. The current study …

YAG: Ce scintillating material was obtained using 3D printing for the first time. A green body
was printed using a stereophotolithography approach from co-precipitated powders and …

The new approach to obtaining ceramic materials in the Na2O–CaO–SiO2–P2O5 system
based on the binder—an aqueous solution of sodium silicate and filler—hydroxyapatite was …

Osteoconductive ceramic implants based on Ca 3–x M 2 x (PO 4) 2 (M= Na, K) double
phosphates and having the Kelvin structure, tailored macropore size (in the range 50–750 …

Macroporous calcium pyrophosphate ceramics with a pore size of 900 μm and a pore
fraction of up to 65% demonstrating compressive strength of 5±1 MPa were formed by DLP …

Luminescent and scintillation ceramic materials with complex shapes, which can be created
by stereolithography 3D printing, are of interest for special phosphor and detector …

В основе методов, используемых в регенеративной медицине, лежит присущая живым
организмам способность к регенерации собственных тканей. В том случае, если …

A technique for colloidal forming of Ca 2 P 2 O 7 macroporous bioceramics, based on low-
pressure injection molding (LPIM) of a glycerol-water slip containing Ca 2 P 2 O 7 and Ca (Н …