Quantitative study of the corrosion evolution and stress corrosion cracking of high strength aluminum alloys in solution and thin electrolyte layer containing Cl

L Wang, J Liang, H Li, L Cheng, Z Cui - Corrosion Science, 2021 - Elsevier
Stress corrosion cracking (SCC) behavior of 2024-T351 and 7075-T651 in solution and thin
electrolyte layer (TEL) are investigated by electrochemical and mechanical testing, surface …

[HTML][HTML] Laser powder bed fusion of AA7075 alloy: Influence of process parameters on porosity and hot cracking

W Stopyra, K Gruber, I Smolina, T Kurzynowski… - Additive …, 2020 - Elsevier
Laser powder bed fusion (LPBF) is an attractive technology of manufacturing high-strength
aluminium alloy parts for the aircraft and automobile industries, limited by poor …

How solute atoms control aqueous corrosion of Al-alloys

H Zhao, Y Yin, Y Wu, S Zhang, AM Mingers… - Nature …, 2024 - nature.com
Aluminum alloys play an important role in circular metallurgy due to their good recyclability
and 95% energy gain when made from scrap. Their low density and high strength translate …

Revisiting stress-corrosion cracking and hydrogen embrittlement in 7xxx-Al alloys at the near-atomic-scale

M López Freixes, X Zhou, H Zhao, H Godin… - Nature …, 2022 - nature.com
The high-strength 7xxx series aluminium alloys can fulfil the need for light, high strength
materials necessary to reduce carbon-emissions, and are extensively used in aerospace for …

Enhancing the stress corrosion cracking resistance of a low-Cu containing Al-Zn-Mg-Cu aluminum alloy by step-quench and aging heat treatment

P Xie, S Chen, K Chen, H Jiao, L Huang, Z Zhang… - Corrosion …, 2019 - Elsevier
The influence of heat treatment on stress corrosion cracking resistance of a low-Cu
containing Al-Zn-Mg-Cu aluminum alloy has been investigated. The results show that the …

Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys

A Garner, R Euesden, Y Yao, Y Aboura, H Zhao… - Acta Materialia, 2021 - Elsevier
The size, distribution and chemical composition of grain boundary η-phase precipitates
(GBPs) and micro-segregation present in thick plate (140 mm) 7xxx Al alloys has been …

Some effects of alloy composition on stress corrosion cracking in Al–Zn–Mg–Cu alloys

SP Knight, K Pohl, NJH Holroyd, N Birbilis… - Corrosion …, 2015 - Elsevier
Stress corrosion cracking (SCC) of two lower-copper Al–Zn–Mg–Cu alloys, AA7079 and
AA7022 (0.6–0.9 wt% Cu), and a higher-copper AA7075 (1.5 wt% Cu) alloy are reported. In …

[HTML][HTML] Effect of cooling rate on the composition and chemical heterogeneity of quench-induced grain boundary η-phase precipitates in 7xxx aluminium alloys

Y Yao, R Euesden, ME Curd, C Liu, A Garner… - Acta Materialia, 2024 - Elsevier
The mechanical properties and stress corrosion cracking (SCC) resistance of 7xxx series
aluminium alloys are significantly affected by the composition and distribution of precipitates …

[HTML][HTML] Mitigation effects of over-aging (T73) induced intergranular corrosion on stress corrosion cracking of AA7075 aluminum alloy and behaviors of η phase grain …

Y Xiong, JD Robson, Z Cao, Y Deng, Y Yao, X Zhong… - Corrosion …, 2023 - Elsevier
The stress corrosion cracking (SCC) behaviors of over-aged and peak-aged AA7075
aluminum alloys in a 5 wt% NaCl solution were compared. Even though the over-aging …

Effects of different initial states on dynamic tensile properties and microstructure of 7075 aluminum alloy

W Peng, Y Gao, H Li, L Lu, K Ma, L Lin, Y Shao… - Materials Science and …, 2024 - Elsevier
In the present work, the effects of solution quenching (SQ), under-aging (UA), peak-aging
(PA), and over-aging (OA) on the dynamic tensile properties of 7075 aluminum alloy have …