From drop impact physics to spray cooling models: a critical review
J Breitenbach, IV Roisman, C Tropea - Experiments in Fluids, 2018 - Springer
Spray–wall interaction is an important process encountered in a large number of existing
and emerging technologies and is the underlying phenomenon associated with spray …
and emerging technologies and is the underlying phenomenon associated with spray …
Drop splashing induced by target roughness and porosity: The size plays no role
IV Roisman, A Lembach, C Tropea - Advances in colloid and interface …, 2015 - Elsevier
Drop splash as a result of an impact onto a dry substrate is governed by the impact
parameters, gas properties and the substrate properties. The splash thresholds determine …
parameters, gas properties and the substrate properties. The splash thresholds determine …
Effect of poling state and morphology of piezoelectric poly (vinylidene fluoride) membranes for skeletal muscle tissue engineering
This work reports on the influence of polarization and morphology of electroactive poly
(vinylidene fluoride), PVDF, on the adhesion and morphology of myoblast cells. Non …
(vinylidene fluoride), PVDF, on the adhesion and morphology of myoblast cells. Non …
Hydrodynamics of droplet impingement on hot surfaces of varying wettability
This work presents on the hydrodynamics of water droplet impingement on superheated
solid surfaces across the entire wettability spectrum: superhydrophilic, hydrophilic …
solid surfaces across the entire wettability spectrum: superhydrophilic, hydrophilic …
Influence of surface topography in the boiling mechanisms
The present paper addresses the qualitative and quantitative analysis of the pool boiling
heat transfer over micro-structured surfaces. The surfaces are made from silicon chips, in the …
heat transfer over micro-structured surfaces. The surfaces are made from silicon chips, in the …
Dynamic behavior of non-evaporative droplet impact on a solid surface: Comparative study of R113, water, ethanol and acetone
Droplet impact on a solid surface is a common phenomenon observed in industries.
Fundamental investigations of droplet impact are helpful in enhancing spray cooling …
Fundamental investigations of droplet impact are helpful in enhancing spray cooling …
Droplet impact dynamics and transient heat transfer of a micro spray system for power electronics devices
SS Hsieh, SY Luo - International Journal of Heat and Mass Transfer, 2016 - Elsevier
We present a study on the instantaneous heat transfer and droplet impact dynamics caused
by multiple streams of water impinging on a polished surface with a constant heat flux (0.1 …
by multiple streams of water impinging on a polished surface with a constant heat flux (0.1 …
High-speed shadow imagery to characterize the size and velocity of the secondary droplets produced by drop impacts onto a heated surface
G Castanet, P Dunand, O Caballina, F Lemoine - Experiments in fluids, 2013 - Springer
This study presents the developmental stages of an optical technique that aims at measuring
simultaneously the droplet size and velocity. This technique is based on shadowgraphy …
simultaneously the droplet size and velocity. This technique is based on shadowgraphy …
The effects of micro-structured surfaces on multi-nozzle spray cooling
Y Hou, Y Tao, X Huai - Applied thermal engineering, 2014 - Elsevier
Experiments were conducted to investigate heat transfer characteristics of spray cooling with
eight nozzles for micro-structured surfaces included cubic pin fins and straight pin fins of …
eight nozzles for micro-structured surfaces included cubic pin fins and straight pin fins of …
Characterization of pool boiling mechanisms over micro-patterned surfaces using PIV
The present work addresses hydrodynamic and heat transfer processes of pool boiling over
surfaces patterned with micro-cavities, in the context of cooling applications. The cavities are …
surfaces patterned with micro-cavities, in the context of cooling applications. The cavities are …