This paper presents a multi-level viscoplastic self-consistent (VPSC) model for correlated
structures (CS-VPSC). A polycrystalline aggregate response is homogenized over …

4PH stainless steel parts, fabricated by selective laser melting, were subjected to the
solution and aging treatments conducted under vacuum and hot isostatic pressing (HIP) …

A gradient structure layer was fabricated on 17-4PH specimens using an ultrasonic surface
rolling process. The separation-factor methods confirmed that residual compressive stress …

Additive manufacturing made a revolution in the Manufacturing area by producing parts with
less lead time and highest complexity. It creates parts in layer by layer manner using …

The present study performed parametric investigation and characterizations on 17-4 PH
stainless steel built by selective laser melting. Cubical samples were deposited by …

采用选择性激光熔化增材制造技术, 制备了GP1 不锈钢单轴拉伸板条试样和层裂圆片试样,
并对材料微观结构进行了表征. 借助Zwick-HTM5020 高速拉伸试验机, 并结合数字图像相关性全 …

The tensile mechanical behavior and spall response of a selective laser melted (SLM) 17-4
precipitation-hardening (PH) stainless steel were studied comprehensively through tensile …

Le procédé de fusion laser sélective de lit de poudre, également appelé SLM, permet de
fabriquer des pièces métalliques en fusionnant des couches de poudre. Cette méthode …

The paper presents the results of the investigation of microstructure of the welded
X5CrNiCuNb16-4 (17-4PH) steel after solution treatment and aging at 620 C for different …

In the present study, the effect of hexagonal (inside out and outside in), rectangular
(horizontal, vertical, alternate, and both), and strip (horizontal, vertical, alternate, and both) …