Solid-state joining of aluminum to titanium: a review
VS Gadakh, VJ Badheka… - Proceedings of the …, 2021 - journals.sagepub.com
The dissimilar material joining of aluminum and titanium alloys is recognized as a challenge
due to the significant differences in the physical, chemical, and metallurgical properties of …
due to the significant differences in the physical, chemical, and metallurgical properties of …
[HTML][HTML] Additive manufacturing of functionally graded Ti-Al structures by laser-based direct energy deposition
Two different grading strategies were investigated when manufacturing functionally graded
materials (FGMs) by means of laser-based direct energy deposition. The FGMs consist of the …
materials (FGMs) by means of laser-based direct energy deposition. The FGMs consist of the …
Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium
The most important issue associated with dissimilar welding is the formation of detrimental
intermetallics and consequent reduction in mechanical properties of the weld. It was …
intermetallics and consequent reduction in mechanical properties of the weld. It was …
Effect of process parameters on the mechanical behavior of additively manufactured and FSW joined PLA wood sheets
Friction stir welding (FSW), a solid‐state joining method, is an innovative technique widely
employed in the welding of thermoplastics, with broad application areas such as the …
employed in the welding of thermoplastics, with broad application areas such as the …
Microstructure and mechanical properties of AA7075/AA5182 jointed by FSW
In this study, AA7075 and AA5182 aluminium alloys were joined using different rotation
speeds (980, 1325 and 1800 rpm), feed rates (108 and 233 mm/min) and stirred pins having …
speeds (980, 1325 and 1800 rpm), feed rates (108 and 233 mm/min) and stirred pins having …
The experimental study of CFRP interlayer of dissimilar joint AA7075-T651/Ti-6Al-4V alloys by friction stir spot welding on mechanical and microstructural properties
The present study focused on two dissimilar metal alloys: AA7075-T651 and Ti-6Al-4V alloys
with additional carbon fiber-reinforced polymer (CFRP) as an interlayer were welded …
with additional carbon fiber-reinforced polymer (CFRP) as an interlayer were welded …
Enhancement of joint properties and reduction of intermetallics in FSW of highly dissimilar Al/Ti alloys
SE Mustafa, RN Rai, R Firoz - Welding in the World, 2023 - Springer
In this research work, welding of highly dissimilar aluminum alloy (6061-T6) and titanium
alloy (Ti6Al4V) has been carried out using copper (Cu) interlayer with the friction stir welding …
alloy (Ti6Al4V) has been carried out using copper (Cu) interlayer with the friction stir welding …
Friction riveting for joining of wide range of dissimilar materials
R Sankaranarayanan, N Hynes - AIP Conference Proceedings, 2019 - pubs.aip.org
Considerable as well as thriving demand and challenges of transportation industry such as
cost cutting measures, new environmental conservation regulations and the impressive …
cost cutting measures, new environmental conservation regulations and the impressive …
Effect of rotational speed on static and fatigue properties of rotary friction welded dissimilar AA7075/AA5083 aluminium alloy joints
In this work, rotary friction welding processes of dissimilar AA7075/AA5083 aluminium alloy
rods with the diameter of 15 mm were performed at varying rotational speeds, typically 370 …
rods with the diameter of 15 mm were performed at varying rotational speeds, typically 370 …
Investigation of metallurgical characterization and mechanical properties of double-sided friction stir welding of aluminum 6061 T6 alloy
In the present study, the effect of tool tilt angle was investigated to appraise the metallurgical
and mechanical behavior of double-sided friction stir welded joints of AA-6061 T6 alloy of 6 …
and mechanical behavior of double-sided friction stir welded joints of AA-6061 T6 alloy of 6 …