Transverse load optimization in Nb3Sn CICC design; influence of cabling, void fraction and
strand stiffness - IOPscience This site uses cookies. By continuing to use this site you agree to …

The differences in thermal contraction of the composite materials in a cable in conduit
conductor (CICC) for the International Thermonuclear Experimental Reactor (ITER), in …

The ITER magnets experiencing high magnetic field (> 11T), the central solenoid (CS) and
the toroidal field (TF) system, will make use of complex conductors using Nb3Sn as …

We present the latest results of the novel model for transverse electromagnetic load
optimization (TEMLOP) especially developed for the ITER type of cable-in-conduit …

We have measured the critical current (I c) of a high current density Nb 3 Sn strand
subjected to spatial periodic bending, periodic contact stress and uniaxial strain. The strand …

Abstract Two ITER-type Nb 3 Sn superconductor strands, one prepared with the bronze
route and the other with the internal-tin route, were used to investigate the impact of filament …

Abstract Superconducting Nb 3 Sn magnets have composite structures consisting of Nb 3 Sn
multi-filaments, cooper, and epoxy resin. The complicated strain states due to different …

Abstract High-performance Nb 3 Sn conductors are intended to be used in large-scale
magnets like the International Thermonuclear Experimental Reactor (ITER) and in the …

Abstract Knowledge of the influence of bending on the critical current (I c) of Nb 3 Sn strands
is essential for the understanding of the reduction in performance due to transverse …

We have developed a new probe for testing the influence of local contact load from crossing
superconducting Nb 3 Sn strands. The probe is part of the TARSIS setup for strand stress …