Femtosecond laser-induced production of ZnO@ Ag nanocomposites for an improvement in photocatalytic efficiency in the degradation of organic pollutants

Y Gündoğdu, S Dursun, SY Gezgin, HŞ Kiliç - Optics & Laser Technology, 2024 - Elsevier
Green synthesis based nanoparticle production methods and water purification techniques
were carried out using pulsed laser ablation and photocatalysis degradation techniques …

Determination of photovoltaic parameters of CIGS hetero junction solar cells produced by PLD technique, using SCAPS simulation program

SY Gezgin, A Houimi, Y Gündoğdu, B Mercimek… - Vacuum, 2021 - Elsevier
In this study, CIGS ultrathin films of 52 nm, 89 nm, 183 nm and 244 nm thicknesses were
grown on a n-Si substrate using PLD technique, then Ag/CIGS/Si/Al hetero-junction solar …

A rectifying Al/ZnO/pSi/Al heterojunction as a photodiode

M Benhaliliba - Micro and Nanostructures, 2022 - Elsevier
The investigation reports on fabrication and measurements of heterojunction diode based
on ZnO layer. The layers are ultrasonic sprayed onto p-type silicon substrates at 350​° C …

Investigation of photocatalytic activity (under visible light) of ultrathin CZTS films produced in different thicknesses by PLD method

S Dursun, FB Sarıipek, S Kılıç, S Yiğit Gezgin… - Optical and Quantum …, 2023 - Springer
Abstract Cu2ZnSnS4 (CZTS) thin films in 61 nm, 112 nm, 242 nm and 313 nm thickness
which have been produced by Pulsed Laser Deposition (PLD) on Soda Lime Glass …

Production and photovoltaic characterisation of n-Si/p-CZTS heterojunction solar cells based on a CZTS ultrathin active layers

SY Gezgin, A Houimi, HŞ Kılıç - Optik, 2019 - Elsevier
In this study, Au/n-Si/p-CZTS/Ag solar cells have been produced by using PLD technique.
Ultrathin CZTS films have been grown on n-Si wafer in different thicknesses depending on …

An improvement on the conversion efficiency of Si/CZTS solar cells by LSPR effect of embedded plasmonic Au nanoparticles

SY Gezgi̇n, HŞ Kılıç - Optical Materials, 2020 - Elsevier
Abstract In this work, Au/Si/CZTS/Ag and Au/Si/plasmonic-CZTS/Ag solar cells have been
produced using PLD technique. These CZTS solar cells have been produced based on p …

The effect of CZTS ultrathin film thickness on the electrical characteristic of CZTS/Si heterojunction solar cells in the darkness and under the illumination conditions

SY Gezgin, A Houimi, B Mercimek, HŞ Kiliç - Silicon, 2021 - Springer
In this study, Ag/CZTS/Si/Al heterojunction solar cells were produced depending on some
parameters of CZTS ultrathin active film layers grown on a n-Si wafer by PLD technique …

Modelling and investigation of the electrical properties of CIGS/n-Si heterojunction solar cells

SY Gezgin - Optical Materials, 2022 - Elsevier
Abstract Ag/CIGS/n-Si/Al solar cells which were formed basing ultrathin film thickness by
Pulse Laser Deposition (PLD) method, to be used as a sub-solar cell in tandem solar cells …

Superstrate and substrate thin film configuration of CdS/CZTS solar cell fabricated using SILAR method

J Kaza, MR Pasumarthi, PS Avadhani - Optics & Laser Technology, 2020 - Elsevier
In this paper, A Superstrate and Substrate configuration of a solar cell is obtained by
depositing Copper Zinc Tin Sulfate (CZTS) and Cadmium Sulphate (CdS) in the …

The choice of Zn or ZnS layer in the stacked precursors for preparation of Cu2ZnSnS4 (CZTS) thin films

MA Olgar, A Seyhan, AO Sarp, R Zan - Superlattices and Microstructures, 2020 - Elsevier
Abstract Cu 2 ZnSnS 4 (CZTS) thin films are commonly used as an absorber layer in the thin
film solar cell structure. In this study, CZTS thin films were produced by sulfurization of …