Adv. Mater. 2011, 23, 5574–5580 shows the cyclic voltammogramms (CV) of the pristine
FeOOH electrode in 1 mol L− 1 LiOH aqueous solution. During the first negative scan, an …

The galvanostatic charge–discharge curves of the V2o 5 and PPy@ V2o 5 electrodes
(Figure 3 c) deviate from an ideal linear shape due to the faradic pseudocapacitive property …

Ongoing technological advances in such disparate areas as consumer electronics,
transportation, and energy generation and distribution are often hindered by the capabilities …

MnO 2 nanosheets were prepared by hydrothermal deposition method, and supported on
biomass-derived crosslinked carbon nanosheets to form a composite material (MnO 2@ R) …

Aqueous asymmetric supercapacitors (ASCs) may offer comparable or higher energy
density than electric double‐layer capacitors (EDLCs) based on organic electrolytes. As …

This book provides a state-of-the-art overview of the research and development of novel
electrolytes and electrolyte configurations and systems to increase the energy density of …

Abstract The NASICON‐type Na3V2 (PO4) 3 (NVP) cathode material is investigated in an
aqueous sodium‐ion battery, which is explored by using a three‐electrode system. The …

Bacterial cellulose (BC) has been considered to be an ideal substrate for electrode materials
due to its characteristics of natural abundance and wide range of sources. Controlling the …

Porous electrodes are fast emerging as essential components for next‐generation
supercapacitors. Using porous structures of Co3O4, Mn3O4, α‐Fe2O3, and carbon, their …

Production cost, electrochemical performance and service life are the key factors in the
design and manufacture of electrode materials for supercapacitors. The problems of low …