Micropitting is currently a significant failure mechanism in carburised steel gears, but the
detailed mechanisms of crack initiation and propagation are not well understood …

The paper investigates the running-in of hardened steel surfaces under mixed lubrication
conditions. Pairs of surfaces of both equal and differing hardness were loaded together …

The objective of this study was to evaluate the performance of helical gears with applied
surface coatings either with or without Inorganic Fullerence Like Material (IFLM) nano …

Metallographic examination performed on a number of micropitted gears has revealed
microstructural features similar to those reported in the literature in fatigued bearings …

The effect of surface features on as-ground gears and the influence of BALINIT® C and Nb–
S coatings on the initiation of micro-pitting damage have been examined in case-carburised …

Rolling contact fatigue (RCF) is one of the major problems observed in gear mechanisms,
which leads to high friction, ultimately resulting in high energy consumption. This paper …

The influence of as-ground surface and the BALINIT® C and Nb–S coatings on contact
fatigue damage have been investigated using testing of case-carburised S156 steel helical …

The elastic properties of η-Fe _2 C η-Fe 2 C (eta carbide) have been determined from ab
initio density functional theory calculations using the generalized gradient approximation …

Durch Einsatz von Getriebeölen mit einer hohen Graufleckentragfähigkeit, kann der
kostspielige Tausch von betroffenen Zahnrädern vermieden werden. Daher müssen Öle …

Micropitting damage is one of the failure modes commonly observed on gears and bearings
in wind turbine (WT) gearboxes. It can lead to destructive failures which, in turn, lead to …