Manufacturing businesses aiming to deliver their new customised products more quickly and
gain more consumer markets for their products will increasingly employ selective laser …

Selective laser melting (SLM) is an additive manufacturing method with rapid solidification
properties, which is conducive to the preparation of alloys with fine microstructures and …

Individual manganese (Mn) modification cannot prevent the formation of coarse and blocky
Iron-rich phases in recycled Al–Si alloys. In the present work, scanning/transmission …

Many studies have demonstrated a relationship between secondary dendrite arm spacing
(SDAS) and the mechanical behaviour of cast aluminium–silicon alloys, both for tensile and …

In the present work, the effect of yttrium (Y) addition (0, 0.15, 0.3, 0.5 and 0.7 wt%) on the
microstructure and tensile properties of recycled A356 cast alloys containing 1.0 wt% Fe has …

The effect of Fe and Mn on the microstructure and mechanical properties of a series of Al-5
wt% Mg alloys processed by high pressure die casting (HPDC) was investigated. The …

This paper investigates the effect of different casting conditions on the microstructure of Al-
7Si-0.4 Mg alloys with 0.3 wt.% rare earth Y addition and the effect of T6 heat treatment on …

The paper discusses the responses of eutectic silicon and eutectic cells in Al–10Si alloy
upon inoculation with an Al–10Si–2Fe master alloy. The further inoculation hardly destroys …

The Fe-and Mn-rich intermetallics are of great effect on the mechanical properties of the
AA5083 type alloy (Al–5Mg–0.8 Mn). The effect of Fe, Si and cooling rate on the formation of …

The presence and morphology of Fe-containing intermetallic phases affect the mechanical
properties of aluminum alloys, especially in secondary Al–Si-based cast alloys. Although …