Abrasive wear behavior of boronized AISI 8620 steel
M Tabur, M Izciler, F Gul, I Karacan - Wear, 2009 - Elsevier
In this study, AISI 8620 steel was boronized using the solid state boronizing technique.
Processes were carried out at the temperatures of 850, 900 and 950° C for 2, 4 and 6h of …
Processes were carried out at the temperatures of 850, 900 and 950° C for 2, 4 and 6h of …
Corrosion and wear behaviors of boronized AISI 316L stainless steel
In this study, the effects of a boronizing treatment on the corrosion and wear behaviors of
AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of …
AISI 316L austenitic stainless steel (AISI 316L) were examined. The corrosion behavior of …
Microstructure, properties and wear behaviors of (Ni3Al) p reinforced Cu matrix composites
İ Çelikyürek, NÖ Körpe, T Ölçer, R Gürler - Journal of Materials Science & …, 2011 - Elsevier
Pure copper and its composites reinforced with Ni3Al particles were produced by powder
metallurgy (PM). Ni3Al powders were produced by mechanical ball milling from vacuum arc …
metallurgy (PM). Ni3Al powders were produced by mechanical ball milling from vacuum arc …
Investigation of the diffusion kinetics of borided stainless steels
Y Kayali - The physics of metals and metallography, 2013 - Springer
In this study, the kinetics of borides formed on AISI 420, AISI 304 and AISI 304L stainless
steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the …
steels was investigated. Boronizing treatment was carried out using Ekabor-II powders at the …
Investigation of diffusion kinetic values of boronized AISI 303 steel by pack boronizing
Y Kayali, E Mertgenç - Protection of Metals and Physical Chemistry of …, 2020 - Springer
In this study, AISI 303 steels are boronized by pack boring method at 1123, 1173 and 1223
K for 2, 4 and 6 h. The morphology of the boride layers formed on the steel surfaces was …
K for 2, 4 and 6 h. The morphology of the boride layers formed on the steel surfaces was …
Investigation of wear behavior and diffusion kinetic values of boronized Hardox-450 steel
Hardox steels are widely used in the industry as they have many excellent mechanical
properties besides good wear resistance. In this study, Hardox-450 steel was boronized at …
properties besides good wear resistance. In this study, Hardox-450 steel was boronized at …
Investigation of wear and adhesion behaviors of borided steels
In this study, AISI P20, H13 and D2 steels were pack borided at 900 and 950° C for retention
times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical …
times of 2, 4 and 6 h. The boride layer thickness values changed depending on the chemical …
Investigation of wear properties of borided austenitic stainless steel different temperatures and times
E Mertgenc, OF Kesici, Y Kayali - Materials Research Express, 2019 - iopscience.iop.org
Although the corrosion properties of austenitic stainless steels are good, their surface
strength is low and their usage areas are limited. Many processes are implemented to …
strength is low and their usage areas are limited. Many processes are implemented to …
Effects of the boriding process and of quenching and tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel
An investigation was made on the effects of the boriding process and of quenching and
tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel. In this …
tempering after boriding on the microstructure, hardness and wear of AISI 5140 steel. In this …
Influence of manganese on pack boriding behaviour of pure iron
Y Gencer - Surface Engineering, 2011 - journals.sagepub.com
The boronising behaviour of pure iron and Fe–Mn alloys (1, 2, 4, 8, 12 and 16 wt-% Mn) was
investigated by 'pack boronising'at 1100° C for 3 h to determine the effect of Mn. FeB and …
investigated by 'pack boronising'at 1100° C for 3 h to determine the effect of Mn. FeB and …