Contact mechanics in tribological and contact damage-related problems: A review
When two bodies are in contact, various surface/subsurface damage problems may arise,
which significantly shorten the service lives of functional components. These damage …
which significantly shorten the service lives of functional components. These damage …
Study of wear and friction properties of a Co-free CrFeNiAl0. 4Ti0. 2 high entropy alloy from 600 to 950° C
Sliding friction and wear performance of an economical Co-free CrFeNiAl 0.4 Ti 0.2 high
entropy alloy was studied over a wide temperature range. The homogenised alloy …
entropy alloy was studied over a wide temperature range. The homogenised alloy …
Uncovering friction dynamics using hydrogel particles as soft ball bearings
RED Rudge, JPM Van De Sande, JA Dijksman… - Soft Matter, 2020 - pubs.rsc.org
Rolling ball bearings are widely known and applied to decrease friction between two
surfaces. More recently, hydrogel–hydrogel tribopairs have also revealed good but rather …
surfaces. More recently, hydrogel–hydrogel tribopairs have also revealed good but rather …
[HTML][HTML] Wear particle dynamics drive the difference between repeated and non-repeated reciprocated sliding
The dependence of the sliding mode (repeated vs. non-repeated reciprocated sliding) on
the friction and wear behavior of ball-on-flat, brittle non-metallic interfaces in ambient air …
the friction and wear behavior of ball-on-flat, brittle non-metallic interfaces in ambient air …
Tailoring microstructures and properties in Co-free FeNiCrCuAl high entropy alloys by Al addition
P Wang, X Li, K Wang, B Malomo, L Yang - Intermetallics, 2024 - Elsevier
In this study, a series of Co-free FeNiCrCuAl x (x= 0.1, 0.3, 0.5, 0.8 and 1.0) high entropy
alloys (HEAs) were developed by vacuum arc melting and casting method in high-purity …
alloys (HEAs) were developed by vacuum arc melting and casting method in high-purity …
Experimental simulation evaluation and control measures of paving segregation for the stone matrix asphalt mixtures
C Sun, P Li, Y Ma, X Gou, Z Ma - Construction and Building Materials, 2024 - Elsevier
The aggregate segregation for asphalt mixtures, characterized by non-uniform particle
distribution, significantly undermines the quality and performance of pavements. This …
distribution, significantly undermines the quality and performance of pavements. This …
Effect of wear particles and roughness on nanoscale friction
Frictional contacts lead to the formation of a surface layer called the third body, consisting of
wear particles and structures resulting from their agglomerates. Its behavior and properties …
wear particles and structures resulting from their agglomerates. Its behavior and properties …
Dynamics of particle entrainment for glass particles suspended in various fluids
The frictional properties of two sliding surfaces are often influenced by a fluid lubricant's
ability to separate and facilitate movement. When particles are present, their entrainment …
ability to separate and facilitate movement. When particles are present, their entrainment …
Construction of Friction Model of the Third Body Layer and Its Effects on the Dynamic Characteristics in Brake System
Y Zhang, D Wei, B Wu, P Jiang - Journal of …, 2023 - asmedigitalcollection.asme.org
The noise of disk brake pair has always been a difficult problem for enterprises and
researchers. Many factors induce the noise of disk brake pair, among which the influence of …
researchers. Many factors induce the noise of disk brake pair, among which the influence of …
Simulation of a single third-body particle in frictional contact
Q Li - Facta Universitatis, Series: Mechanical Engineering, 2020 - casopisi.junis.ni.ac.rs
Contact of a single third-body particle between two plates is simulated using the Boundary
Element Method. The particle is considered as deformable, and the Coulomb's law of friction …
Element Method. The particle is considered as deformable, and the Coulomb's law of friction …