Nanomaterials synthesis through microfluidic methods: An updated overview
Microfluidic devices emerged due to an interdisciplinary “collision” between chemistry,
physics, biology, fluid dynamics, microelectronics, and material science. Such devices can …
physics, biology, fluid dynamics, microelectronics, and material science. Such devices can …
Mechanical activation of heterogeneous exothermic reactions in powder mixtures
AS Rogachev - Russian Chemical Reviews, 2019 - iopscience.iop.org
The review concerns the results of recent experimental, theoretical and applied studies on
mechanical activation of reactive powder compositions and self-propagating high …
mechanical activation of reactive powder compositions and self-propagating high …
Effect of ball milling time on the structural characteristics and mechanical properties of nano-sized Y2O3 particle reinforced aluminum matrix composites produced by …
Mechanical milling presents an effective solution in producing a homogenous structure for
composites. The present study focused on the production of 0.5 wt% yttria nanoparticle …
composites. The present study focused on the production of 0.5 wt% yttria nanoparticle …
Synthesis of high-purity zircon, zirconia, and silica nanopowders from local zircon sand
ND Lestari, R Nurlaila, NF Muwwaqor, S Pratapa - Ceramics International, 2019 - Elsevier
Abstract High-purity zircon (ZrSiO 4) nanopowder was successfully produced from
Indonesian natural zircon sand using a low-cost purification approach via magnetic …
Indonesian natural zircon sand using a low-cost purification approach via magnetic …
In-situ and ex-situ comparison of oxidation of Inconel 718 manufactured by selective laser melting and conventional methods up to 650° C
This work reveals the initial stages of Inconel 718 (IN718) oxidation manufactured by
selective laser melting (SLM). In-situ and ex-situ investigations were conducted on SLM …
selective laser melting (SLM). In-situ and ex-situ investigations were conducted on SLM …
NiAl–TiC–Al2O3 composite formed by self-propagation high-temperature synthesis process: Combustion behaviour, microstructure, and properties
TWB Riyadi, T Zhang, D Marchant, X Zhu - Journal of Alloys and …, 2019 - Elsevier
Intermetallic-ceramic composites formed by the self-propagation high-temperature synthesis
(SHS) process have attracted much interest in research development since they offer low …
(SHS) process have attracted much interest in research development since they offer low …
Orientation Relationships and Interface Structure in MgAl2O4 and MgAlB4 Co-Reinforced Al Matrix Composites
F Wang, J Li, C Shi, E Liu, C He… - ACS applied materials & …, 2019 - ACS Publications
Ceramic phase reinforced aluminum matrix composites (CAMCs) are widely used in high-
tech fields represented by aerospace industry due to their advantages of high specific …
tech fields represented by aerospace industry due to their advantages of high specific …
Microstructures and high-temperature wear behavior of NiAl/WC-Fex coatings on carbon steel by plasma cladding
J Yuan, Q Wang, X Liu, S Lou, Q Li, Z Wang - Journal of Alloys and …, 2020 - Elsevier
Abstracts In this paper, in order to improve the carbon steel service condition in a severe
high-temperature wear field, a novel and dense NiAl/WC (NiAl-20% wtWC) and NiAl/WC-Fe …
high-temperature wear field, a novel and dense NiAl/WC (NiAl-20% wtWC) and NiAl/WC-Fe …
High-efficiency synthesis of high-performance K0. 5Na0. 5NbO3 ceramics
B Chen, P Liang, D Wu, X Zhao, X Qiao, Z Peng… - Powder Technology, 2019 - Elsevier
Abstract Pure (K 0.5 Na 0.5) NbO 3 (KNN) ceramics with high density, fine and uniform-size
grains were prepared by mechanochemical activation-assisted process. The time of …
grains were prepared by mechanochemical activation-assisted process. The time of …
The ball to powder ratio (BPR) dependent morphology and microstructure of tungsten powder refined by ball milling
The nanocrystalline tungsten powder with the minimum grain size of around 5 nm was
fabricated by mechanical alloying. The powder refinement process and the influence of ball …
fabricated by mechanical alloying. The powder refinement process and the influence of ball …