The effect of element Cu on microstructures and corrosion behavior of the directional
structure Ni-based coatings were investigated experimentally. The element Cu enhanced …

In this work, superhard nanoparticle cubic boron nitride (cBN) was introduced into Ni-WP
bath, and Ni-WP/cBN composite coatings with different cBN concentrations were …

In this work, preparation of Cu-Ni/Nano-Al 2 O 3 composite coating with (111)-preferred
orientation on the surface of the H64 brass via electrodeposition technique. Variation of the …

Because the wear and corrosion of marine engineering equipment will cause huge
economic losses to enterprises every year, thus it is necessary to develop advanced …

PDA-functionalized h-BN nanomaterials (Ph-BN) were used to reinforce the
electrodeposited Nisingle bondW coatings. Compared with the h-BN nanomaterial, Ph-BN …

W–Cu composite powders prepared via the wet chemical method in the form of W-coated Cu
contributed greatly to the materials' density and the homogeneity. The powders were …

Corrosion of soft magnetic materials during service can significantly impact their
performance and service life, therefore it is important to improve their corrosion resistance. In …

The process of electrodeposition of Cu-Ni-W thin films is discussed in the article, utilizing an
aqueous sulfate–citrate bath. The current density was varied within the range of− 5 to− 60 …

Abstract Nanocrystalline nickel–cobalt (Ni–Co) binary alloy sheets were fabricated through
electroforming in an acidic aqueous bath using exfoliation from a metallic titanium cathode …

Plasma‐assisted low‐pressure cold spraying and conventional cold spraying methods are
used to prepare copper coatings on copper substrates. The thickness, porosity …