Frontiers of mid-IR lasers based on transition metal doped chalcogenides
SB Mirov, IS Moskalev, S Vasilyev… - IEEE Journal of …, 2018 - ieeexplore.ieee.org
Enabling broad tunability, high peak and average power, ultrashort pulse duration, and all
known modes of laser operation-transition-metal (TM)-doped II-VI chalcogenides are the …
known modes of laser operation-transition-metal (TM)-doped II-VI chalcogenides are the …
[HTML][HTML] 中红外Fe2+: ZnSe 激光器研究进展
徐飞， 潘其坤， 陈飞， 张阔， 于德洋， 何洋， 孙俊杰 - Chinese Optics, 2021 - opticsjournal.net
摘要发光谱位于3~ 5 μm 大气窗口处的中红外激光在医疗, 工业加工, 大气遥感, 空间通讯,
红外对抗等领域具有广泛的应用前景. 以过渡金属(TM) 掺杂Ⅱ~ Ⅵ 族硫化物晶体作为增益介质 …
红外对抗等领域具有广泛的应用前景. 以过渡金属(TM) 掺杂Ⅱ~ Ⅵ 族硫化物晶体作为增益介质 …
High-efficiency, continuous-wave Fe: ZnSe mid-IR laser end pumped by an Er: YAP laser
Fe: ZnSe lasers operating in the mid-IR spectral region have gained widespread attention
due to their numerous potential applications. This study presents a high-efficiency …
due to their numerous potential applications. This study presents a high-efficiency …
Demonstration and power scaling of an Fe: CdMnTe laser at 5.2 microns
A sample of Fe: CdMnTe was grown from melt using the Bridgman technique and was
polished and coated for use as a laser crystal. Optical spectroscopy techniques were used to …
polished and coated for use as a laser crystal. Optical spectroscopy techniques were used to …
Increasing the performance of an Fe: ZnSe laser using a hot isostatic press
A sample of Fe: ZnSe fabricated by post-growth thermal diffusion was purchased
commercially. The sample was cooled to 80 K using liquid nitrogen and used as the gain …
commercially. The sample was cooled to 80 K using liquid nitrogen and used as the gain …
Continuous wave Fe2+:ZnSe mid-IR optical fiber lasers
MG Coco Jr, SC Aro, SA McDaniel, A Hendrickson… - Optics …, 2020 - opg.optica.org
Today fiber lasers in the visible to near-infrared region of the spectrum are well known,
however mid-infrared fiber lasers have only recently approached the same commercial …
however mid-infrared fiber lasers have only recently approached the same commercial …
Progress in Cr and Fe doped ZnS/Se mid-IR CW and femtosecond lasers
S Vasilyev, I Moskalev, M Mirov… - Ultrafast Bandgap …, 2017 - spiedigitallibrary.org
This paper summarizes recent improvements of output characteristics of polycrystalline Cr:
ZnS/Se master oscillators in Kerr-Lens-Mode-Locked regime. We developed a flexible …
ZnS/Se master oscillators in Kerr-Lens-Mode-Locked regime. We developed a flexible …
Growth and characterization of Fe2+: ZnSe single crystals for tunable mid-infrared lasers
W Nan, D Yang, B Zhou, Q Fu, H Yu, Z Hu… - Journal of Crystal …, 2023 - Elsevier
Abstract Iron-doped ZnSe (Fe: ZnSe) single crystals were grown by the traveling heater
method with the accelerated crucible rotation technique (ACRT) using SnSe as a solvent …
method with the accelerated crucible rotation technique (ACRT) using SnSe as a solvent …
High power (9.2 W) CW 4.15 μm Fe: ZnSe laser
High Power (9.2 W) CW 4.15 µm Fe:ZnSe laser Page 1 STh1L.6.pdf CLEO 2017 © OSA 2017
High Power (9.2 W) CW 4.15 µm Fe:ZnSe laser DV Martyshkin*, VV Fedorov, M. Mirov, I …
High Power (9.2 W) CW 4.15 µm Fe:ZnSe laser DV Martyshkin*, VV Fedorov, M. Mirov, I …
[HTML][HTML] Mid-infrared laser emission from Fe: ZnSe cladding waveguides
The authors present a mid-IR depressed cladding waveguide laser in Fe: ZnSe. The laser
produced a maximum output power of 76 mW at 4122 nm and laser thresholds as low as …
produced a maximum output power of 76 mW at 4122 nm and laser thresholds as low as …