In this work, the effect of Fe and Ta content on the microstructure and β phase stability of as-
cast designed Ti-xFe-yTa (x= 8, 9, 10 wt% and y= 0, 5, 8, 9, 10 wt%) alloys was investigated …

A group of Tisingle bondxNbsingle bond7Fe (x= 0, 1, 4, 6, 9, 11 wt.%) alloys was designed
and produced by cold crucible levitation melting process. The microstructural characteristic …

Abstract Ti-11Nb-xFe (x= 0.5, 3.5, 6, 9 wt.%) alloys were designed and fabricated by cold
crucible levitation melting to study the effects of Fe addition on their phase transition …

In order to know the influence of laser power on the steel (27SiMn) used for repairing the
column with Inconel 718 powder materials, and to obtain the optimal laser power …

In this work, an Al/Fe 3 Al core–shell nanoparticle was obtained by heat treatment of a
precursor in high purity of argon. The precursor, with Fe (CO) 5 and nano Al as raw …

Microstructure and mechanical properties of (Ti 0.8 Co 0.2) 100− x Zr x (x= 0, 2, 4, 6 and 8
at%) alloys were investigated. The content of Ti 2 Co phase decreases with the content of Zr …

High-density (> 98% of full density) nanocrystalline invar alloys with significantly enhanced
hardness (> 240 in Vicker's hardness) were prepared by sintering compacted Fe-Ni …

The medium and high temperature tribological behavior of different iron aluminide thermal
spray coatings was investigated. Several powders synthesized through different routes (ball …

FeAl and FeAl/TiC coatings are deposited by shrouded plasma spraying. The microstructure
of the as-sprayed and annealed coatings is characterized by scanning electron microscopy …

In previous work by the authors, it was established that additions of 0.2 at.% Ru to an Fe-40
at.% Al alloy improved the corrosion and oxidation resistance of the alloy. The alloy was …