[HTML][HTML] Current challenges and innovative developments in hydroxyapatite-based coatings on metallic materials for bone implantation: A review
Biomaterials are in use for the replacement and reconstruction of several tissues and organs
as treatment and enhancement. Metallic, organic, and composites are some of the common …
as treatment and enhancement. Metallic, organic, and composites are some of the common …
Performance of thermal-sprayed coatings to combat hot corrosion of coal-fired boiler tube and effect of process parameters and post-coating heat treatment on coating …
High-temperature corrosion of coal-fired boiler parts such as water walls and superheated
tubes poses a serious threat to the efficiency of the thermal power plant. To overcome this …
tubes poses a serious threat to the efficiency of the thermal power plant. To overcome this …
[HTML][HTML] Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7 …
The biocompatible hydroxylapatite (Ca 10 (PO 4) 6 (OH) 2)(HA) coating is usually depositing
on the titanium substrate to enhance the healing process of implant and to isolate it from the …
on the titanium substrate to enhance the healing process of implant and to isolate it from the …
[HTML][HTML] Experimental investigations of electrodeposited Zn–Ni, Zn–Co, and Ni–Cr–Co–based novel coatings on AA7075 substrate to ameliorate the mechanical …
G Sundaramali, JP Aiyasamy, S Karthikeyan… - Reviews on Advanced …, 2023 - degruyter.com
The aluminum (Al) alloy AA7075 is widely used in various industries due to its high strength-
to-weight ratio, which is comparable and replaceable to steel in many applications …
to-weight ratio, which is comparable and replaceable to steel in many applications …
Characterization and mechanical behaviour of reinforced hydroxyapatite coatings deposited by vacuum plasma spray on SS-316L alloy
Hydroxyapatite powder reinforced individually with 10 wt percentage (wt%) of Al 2 O 3 and
ZrO 2 (HA+ 10 wt% Al 2 O 3 and HA+ 10 wt% ZrO 2) was thermally sprayed onto SS-316L …
ZrO 2 (HA+ 10 wt% Al 2 O 3 and HA+ 10 wt% ZrO 2) was thermally sprayed onto SS-316L …
Laser coating of bioactive glasses on bioimplant titanium alloys
Laser‐assisted material processing is a promising field for new material synthesis. This
study explores the feasibility of using laser as a tool to synthesize SiO2‐Na2O‐CaO‐P2O5 …
study explores the feasibility of using laser as a tool to synthesize SiO2‐Na2O‐CaO‐P2O5 …
Microstructure and surface mechanical properties of plasma spray deposited and post spray heat treated hydroxyapatite (HA) based composite coating on titanium …
R Kumari, JD Majumdar - Materials Characterization, 2017 - Elsevier
The present study concerns a detailed microstructural characterization and evaluation of
surface mechanical properties of the plasma spray deposited hydroxyapatite (HA) based …
surface mechanical properties of the plasma spray deposited hydroxyapatite (HA) based …
Effect of post coating processing on the morphological and mechanical properties of plasma Spray-reinforced hydroxyapatite coating
The biocompatible Hydroxyapatite (HA) coating helps titanium alloy recover and insulates
implants from the body's environment. FDA recommends plasma spray to cover HA on body …
implants from the body's environment. FDA recommends plasma spray to cover HA on body …
[HTML][HTML] Enhancing the performance of reinforced hydroxyapatite coatings through post coating treatment
To enhance the metallurgical, mechanical, and biological properties of medical implants in
bodily fluid environments, biocompatible coatings are applied to biomaterials. These …
bodily fluid environments, biocompatible coatings are applied to biomaterials. These …
Development of Functionally Graded HA-Al2O3-TiO2 Composite Coating on Ti Alloy: Microstructural Characterization, Nano-mechanical Properties, and Wear …
KB Yadav, R Kumari - Journal of Materials Engineering and Performance, 2024 - Springer
Abstract Functionally graded HA-Al2O3-TiO2 composite coating and HA coating have been
developed on Ti-6Al-4V alloy by using plasma spraying. Subsequently, post-heat treatment …
developed on Ti-6Al-4V alloy by using plasma spraying. Subsequently, post-heat treatment …