In spite of good development and progress in lubricants, billions US dollars are being lost in
many industries and motor vehicles globally due to engine frictions. Therefore, there is a …

In this paper, we review recent research developments regarding the tribological
performances of a series of inorganic nano-additives in lubricating fluids. First, we examine …

Due to the widespread use of nanocarbon materials (NCMs), more researchers are studying
their tribological performances. In this work, the tribological behaviors of the following five …

This research paper addresses the optimization of various control parameters by using the
Taguchi method to assess the tribological properties of PAOs based nanolubricants. The …

In the current study, the tribological performance of two different synthetic lubricants, ie,
polyalphaolefin (PAO 100) and polypropylene glycol (PPG 2000), were analyzed. The …

In the present investigation, the COOH-functionalized multi-walled carbon nanotubes
(MWCNTs) having an outer diameter of 20–30 nm and length 1− 2 μm were dispersed in …

A Fluid Film Bearings (FFBs) operating in hydrodynamic boundary regime can provide
moderate load carrying capacity, negligible wear and friction. However in extreme operating …

The aim of the present study is to investigate the feasibility of developing surfactant-assisted
multiwalled carbon nanotube (MWCNT)-laden lubricant for hybrid aluminum metal matrix …

Under fluctuating environmental and operational condition gears failed. The failure modes of
the gears are divided in two categories lubricated (pitting, flank wear etc.) and strength …

With the increasing demand for the machinery's availability, it becomes critical to have a
periodic check on the health status of the machinery. The process of periodic check consists …