First-principles analysis of how Cobalt doping affects the structural, electronic, and optical properties of α-MoO3
Inbuilt high energy band gap and resistivity cause harm to the intrinsic molybdenum trioxide
(MoO3) for utilizing it directly in gas sensing and optoelectronic devices. Doping with …
(MoO3) for utilizing it directly in gas sensing and optoelectronic devices. Doping with …
Transparent organic photodetector using a near-infrared absorbing cyanine dye
Organic photodetectors are interesting for low cost, large area optical sensing applications.
Combining organic semiconductors with discrete absorption bands outside the visible …
Combining organic semiconductors with discrete absorption bands outside the visible …
The evolution of the Mo5+ oxidation state in the thermochromic effect of MoO3 thin films deposited by rf magnetron sputtering
Molybdenum trioxide (MoO 3) thin films were deposited on glass substrates by rf reactive
magnetron sputtering using a metallic molybdenum target. The thermochromic effect was …
magnetron sputtering using a metallic molybdenum target. The thermochromic effect was …
Structural and optical properties of nanocrystalline α-MoO3 thin films prepared at different annealing temperatures
A Hojabri, F Hajakbari, AE Meibodi - Journal of Theoretical and Applied …, 2015 - Springer
Nanocrystalline α-MoO 3 thin films were prepared successfully by thermal annealing of
molybdenum (Mo) thin films deposited on quartz and silicon substrates using DC magnetron …
molybdenum (Mo) thin films deposited on quartz and silicon substrates using DC magnetron …
Preparation of Ba-doped SrTiO3 photocatalyst by sol-gel method for hydrogen generation
Increasing energy demands and its impact on the environment make it necessary to look for
alternative renewable energy sources. Hydrogen is considered as energy vector but on …
alternative renewable energy sources. Hydrogen is considered as energy vector but on …
Transparent CdO/n-GaN (0001) heterojunction for optoelectronic applications
Undoped CdO films were prepared by sol–gel method. Transparent heterojunction diodes
were fabricated by depositing n-type CdO films on the n-type GaN (0001) substrate. Current …
were fabricated by depositing n-type CdO films on the n-type GaN (0001) substrate. Current …
Effect of thickness and post deposition annealing temperature on the structural and optical properties of thermally evaporated molybdenum oxide films
In this paper, the influence of thickness and post deposition annealing temperature on
thermally evaporated molybdenum oxide films has been studied. The X-ray diffraction (XRD) …
thermally evaporated molybdenum oxide films has been studied. The X-ray diffraction (XRD) …
Facile synthesis, characterization, and photoluminescence of lamellar α-MoO3 thin films
E Ghaleghafi, MB Rahmani - Solid State Sciences, 2019 - Elsevier
In this research, molybdenum trioxide (MoO 3) thin films were coated on glass substrates
using the spray pyrolysis technique. 0.05 M ammonium heptamolybdate tetrahydrate was …
using the spray pyrolysis technique. 0.05 M ammonium heptamolybdate tetrahydrate was …
Annealing effect on physical properties of evaporated molybdenum oxide thin films for ethanol sensing
S Touihri, A Arfaoui, Y Tarchouna, A Labidi… - Applied Surface …, 2017 - Elsevier
This paper deals with some physical investigations on molybdenum oxide thin films growing
on glass substrates by the thermal evaporation method. These films have been subjected to …
on glass substrates by the thermal evaporation method. These films have been subjected to …
On the dependence of structural and sensing properties of sputtered MoO3 thin films on argon gas flow
K Khojier, H Savaloni, S Zolghadr - Applied surface science, 2014 - Elsevier
Nitrogen and carbon oxides (CO, NO and NO 2), released from combustion facilities and
automobiles, are known to be extremely harmful to the human body and also are the main …
automobiles, are known to be extremely harmful to the human body and also are the main …