Among the various surface modification processes, the hot-dip aluminizing process has
increasingly evoked considerable attention. This method has proved to be commercially cost …

Hot dip aluminizing (HDA) of low carbon steel in aluminum bath containing various amounts
of silicon and manganese was studied in this work. The effect of bath alloying elements on …

Medium carbon steels hot-dipped in various Al-Si baths were prepared with Si contents of 0,
2.5, 5, 7.5 and 12.5 wt%. The microstructures of the topcoat and the intermetallic layer were …

In the present study, ferrosilicon-aluminium coating was successfully deposited on the
surface of low‑carbon steel using mechanical alloying (MA) technique. The coating …

Based on laser-induced tungsten inert gas hybrid welding source, the riveting–welding
hybrid joining technology was applied to join Q460 high-strength steel and 6061 Al alloy …

Abstract In this study, GJS-500-14 solution-strengthened ferritic ductile iron was subjected to
successive hot-dip aluminizing (HDA) and austempering. The combination of these …

Hot-dip coating of steel sheets by a novel Al–Mg–Mn alloy, characterization and corrosion
property evaluation of the coatings have been described in this article. Morphology and …

In order to increase the surface hardness and improve the tribological properties of stainless
steel, Fe–Al intermetallic compound layers were created by atmospheric-controlled …

Steel molds used for aluminum die-casting often fail due to excessive wear or cracking
phenomena associated with the soldering effect in contact with molten aluminum, which …

摘要钢材作为基础性结构材料被广泛应用于海洋工程领域, 随着国家对海洋开发的支持力度不断
加大, 对应用于此环境下的钢材的需求也不断增加. 但是, 暴露于苛刻海洋环境下的钢材极易与 …