Diesel particulate filter (DPF) is considered as an effective method to control particulate
matter (PM) emissions from diesel engines, which is included in the mandatory installation …

Implementation of stringent regulations of NOx emission requires the development of new
technologies for NOx removal from exhaust gases. This article summarizes current state of …

The dielectric barrier discharge (DBD) is often used to prepare ozone. In this study, a novel
room temperature oxidative desulfurization method involving ozone oxidation produced in …

Large-volume atmospheric-pressure plasma based on corona discharge was successfully
generated in a sandwich-type plasma reactor by controlling the humidity of the feed gas. The …

Diesel engines are characterized by low CO 2 emissions and high fuel efficiency. However,
their exhausts contain nitrogen oxides (NO x), particulate matter (PM), and hydrocarbons …

Oxidation of NO by ozone in the presence of TiO 2 catalyst was studied at varying NO inlet
concentrations, gas flow rates and reactor temperatures. Ozone produced by a coaxial DBD …

The regeneration of diesel particulate filters (DPFs) is a subject that has attracted
considerable interest. Although the ozone injection method is effective, it is unclear whether …

Based on indirect non-thermal plasma (NTP) technology, an experimental study of diesel
particulate filter (DPF) regeneration was implemented by a dielectric barrier discharge …

This study is seeking to investigate the effect of non-thermal plasma technology in the
abatement of particulate matter (PM) from the actual diesel exhaust. Ozone (O 3) strongly …

To investigate the effect of nonthermal plasma (NTP) on the microstructure and oxidation
characteristics of particulate matter (PM) from diesel engines at different oxidation stages, a …