Exfoliation of montmorillonite and related properties of clay/polymer nanocomposites
TT Zhu, CH Zhou, FB Kabwe, QQ Wu, CS Li… - Applied clay …, 2019 - Elsevier
Exfoliating montmorillonite (Mt) to nanolayers is a crucial step during producing clay/polymer
nanocomposites (CPN). Only well-exfoliated and well-dispersed Mt. nanolayers in the …
nanocomposites (CPN). Only well-exfoliated and well-dispersed Mt. nanolayers in the …
[HTML][HTML] Critical review of the parameters affecting the effectiveness of moisture absorption treatments used for natural composites
AY Al-Maharma, N Al-Huniti - Journal of Composites Science, 2019 - mdpi.com
Natural composites can be fabricated through reinforcing either synthetic or bio-based
polymers with hydrophilic natural fibers. Ultimate moisture absorption resistance at the fiber …
polymers with hydrophilic natural fibers. Ultimate moisture absorption resistance at the fiber …
An overview of burst, buckling, durability and corrosion analysis of lightweight FRP composite pipes and their applicability
The main aim of this review article was to address the performance of filament wound fibre
reinforced polymer (FRP) composite pipes and their critical properties, such as burst …
reinforced polymer (FRP) composite pipes and their critical properties, such as burst …
The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins
In this study, the effects of different harsh aging environments on the chemical and
mechanical properties of neat and multiwall carbon nanotubes (MWCNT) reinforced epoxy …
mechanical properties of neat and multiwall carbon nanotubes (MWCNT) reinforced epoxy …
[HTML][HTML] An overview of endurance and ageing performance under various environmental conditions of hybrid polymer composites
Fibre reinforced polymer (FRP) hybrid composites builds vertically due to the achievement of
custom-made properties with lightweight. However, these materials have finding limitations …
custom-made properties with lightweight. However, these materials have finding limitations …
[HTML][HTML] Corrosion behaviour of high-strength Al 7005 alloy and its composites reinforced with industrial waste-based fly ash and glass fibre: comparison of stir cast …
PK Swamy, S Mylaraiah… - Materials, 2021 - mdpi.com
The stringent demand to develop lightweight materials with enhanced properties suitable for
various engineering applications is the focus of this research work. Industrial wastes such as …
various engineering applications is the focus of this research work. Industrial wastes such as …
[HTML][HTML] An experimental investigation on performances recovery of glass fiber reinforced composites exposed to a salt-fog/dry cycle
V Fiore, L Calabrese, R Miranda, D Badagliacco… - Composites Part B …, 2023 - Elsevier
The main goal of this paper is the evaluation of the properties reversibility of glass fiber
reinforced polymers (GFRP s) under discontinuous exposure to aggressive environmental …
reinforced polymers (GFRP s) under discontinuous exposure to aggressive environmental …
Preparation, characterization, mechanical and barrier properties investigation of chitosan-kaolinite nanocomposite
The purpose of this study was to prepare a novel Clay Bio-Polymer Nanocomposite (CBPN)
films by mixing polymer (chitosan, C) with exfoliated nanoclay (kaolinite, k). DRX has shown …
films by mixing polymer (chitosan, C) with exfoliated nanoclay (kaolinite, k). DRX has shown …
Low-velocity impact behavior of incorporated GFRP composites with nanoclay and nanosilica in a corrosive environment: Experimental and numerical study
Y Gitiara, R Barbaz-Isfahani… - Journal of …, 2021 - journals.sagepub.com
Investigation and analysis of the dynamic behavior of composite materials and their failure
resistance are essential. The main aim of this study is to investigate the improvement of …
resistance are essential. The main aim of this study is to investigate the improvement of …
Synergistic effect of compatibilized nanoclay/polyethylene fibers on the impact strength of epoxy‐glass fiber nanocomposites
Epoxy‐based glass fiber nanocomposites (EGFCs) have good static mechanical properties
but lack in impact strength. Addition of thermoplastic fillers to EGFCs enhanced the impact …
but lack in impact strength. Addition of thermoplastic fillers to EGFCs enhanced the impact …