Nanobiopesticides: Are they the future of phytosanitary treatments in modern agriculture?
S Machado, R Pereira, RMOF Sousa - Science of the Total Environment, 2023 - Elsevier
The world's population is continuously increasing; therefore, food availability will be one of
the major concerns of our future. In addition to that, many practices and products used, such …
the major concerns of our future. In addition to that, many practices and products used, such …
Effect of tempering temperature and subzero treatment on microstructures, retained austenite, and hardness of AISI D2 tool steel
MA Mochtar, WN Putra, M Abram - Materials Research Express, 2023 - iopscience.iop.org
The presence of retained austenite in the hardening process of tool steel often causes the
lower hardness compared to the hardness requirements and poor dimensional stability in …
lower hardness compared to the hardness requirements and poor dimensional stability in …
[HTML][HTML] Physical and thermodynamic simulations of gamma-prime precipitation in Haynes® 282® using arc heat treatment
K Vattappara, VA Hosseini, C Joseph… - Journal of Alloys and …, 2021 - Elsevier
Haynes 282 is a Ni-based gamma prime (γ′) strengthening alloy with a balanced
combination of high temperature properties and fabricability. This paper aims to study the …
combination of high temperature properties and fabricability. This paper aims to study the …
Investigation on the effect of cryogenic treatment on tungsten carbide milling insert with 11% cobalt (WC–11% Co)
M Padmakumar, D Dinakaran - SN Applied Sciences, 2020 - Springer
The objective of this research is to evaluate the performance of cryogenically treated
cemented carbide milling inserts with 11% cobalt content in face milling of EN19 steel. Two …
cemented carbide milling inserts with 11% cobalt content in face milling of EN19 steel. Two …
Effect of Sc and Zr on precipitation behaviour of wrought Al-bronze
Aluminium bronze doped with Sc and Zr were prepared by casting followed by cold-rolling
with varied degrees of deformation. Then, the cold-rolled samples were aged for one hour at …
with varied degrees of deformation. Then, the cold-rolled samples were aged for one hour at …
On the robustness of the Kelvin probe based potentiometric hydrogen electrode method and its application in characterizing effective hydrogen activity in metal: 5 wt …
CH Wu, W Krieger, M Rohwerder - Science and technology of …, 2019 - Taylor & Francis
Quantitative detection of hydrogen in metal is important in providing a better basis for
fundamental investigations of hydrogen embrittlement and hydrogen-related corrosion …
fundamental investigations of hydrogen embrittlement and hydrogen-related corrosion …
Strengthening mechanism in the dissimilar CpTi/Inconel 718 joints obtained through diffusion bonding.
MA Rabbani, M Junaid, T Shehbaz, FN Khan - Materials Today …, 2023 - Elsevier
The lap joints of the CpTi/Inconel-718 was obtained by Diffusion bonding (DB) at 1020° C for
1.5 h. Microstructure and chemical composition of the lap joints were examined using …
1.5 h. Microstructure and chemical composition of the lap joints were examined using …
Reobservations of recrystallization and its effect on mechanical and magnetic properties in a severely cold-rolled Ni-based soft magnetic alloy
A Mahdavi, AR Mashreghi, S Hasani… - Archives of Metallurgy …, 2022 - yadda.icm.edu.pl
ReobseRvations of RecRystallization and its eeffect on Mechanical and Magnetic
PRoPeRties in a seveRely cold-Rolled ni-based soft Magnetic alloy despite of extensive …
PRoPeRties in a seveRely cold-Rolled ni-based soft Magnetic alloy despite of extensive …
Influences of grain size and twin boundary on the tensile properties of nanocrystalline face-centered cubic Cu50Ni50 alloy
AS Tran - Molecular Simulation, 2022 - Taylor & Francis
The effects of grain size (GS) and distance between twin boundaries (d) on the tensile
properties of nanocrystalline (NC) face-centered cubic Cu50Ni50 alloy are studied using the …
properties of nanocrystalline (NC) face-centered cubic Cu50Ni50 alloy are studied using the …
Effect of quenching and tempering medium carbon steel AISI 1045 to microstructure and hardness
MR Pangaribawa, PI Purboputo… - AIP Conference …, 2024 - pubs.aip.org
Metal is an essential substance in the industrial world for supporting human life and
technological advancement. Shaping and increasing metal's ability involves the heat …
technological advancement. Shaping and increasing metal's ability involves the heat …