Design status of ASPIICS, an externally occulted coronagraph for PROBA-3

E Renotte, A Alia, A Bemporad… - Solar Physics and …, 2015 - spiedigitallibrary.org
The “sonic region” of the Sun corona remains extremely difficult to observe with spatial
resolution and sensitivity sufficient to understand the fine scale phenomena that govern the …

Design and modelisation of ASPIICS optics

C Galy, S Fineschi, D Galano… - Solar Physics and …, 2015 - spiedigitallibrary.org
In the framework of development of ASPIICS (Association of Spacecraft for Polarimetric and
Imaging Investigation of the Corona of the Sun), the Centre Spatial de Liege is responsible …

PROBA-3 formation-flying metrology: algorithms for the shadow position sensor system

M Casti, A Bemporad, S Fineschi… - … on Space Optics …, 2019 - spiedigitallibrary.org
PROBA-3 ESA's mission aims at demonstrating the possibility and the capacity to carry out a
space mission in which two spacecrafts fly in formation and maintain a fixed configuration. In …

Recent achievements on ASPIICS, an externally occulted coronagraph for PROBA-3

E Renotte, S Buckley, I Cernica, F Denis… - Space Telescopes …, 2016 - spiedigitallibrary.org
This paper presents the current status of ASPIICS, a solar coronagraph that is the primary
payload of ESA's formation flying in-orbit demonstration mission PROBA-3. The “sonic …

The shadow position sensors (SPS) formation flying metrology subsystem for the ESA PROBA-3 mission: present status and future developments

M Focardi, V Noce, S Buckley, K O'Neill… - Space Telescopes …, 2016 - spiedigitallibrary.org
PROBA-3 [1][2] is a Mission of the European Space Agency (ESA) composed of two
formation-flying satellites, planned for their joint launch by the end of 2018. Its main …

Formation flying metrology for the ESA-PROBA3 mission: the Shadow Position Sensors (SPS) silicon photomultipliers (SiPMs) readout electronics

M Focardi, A Bemporad, S Buckley… - Solar Physics and …, 2015 - spiedigitallibrary.org
The European Space Agency (ESA) is planning to launch in 2018 the PROBA3 Mission,
designed to demonstrate the inorbit formation flying (FF) attitude capability of its two …

[HTML][HTML] Influence of misalignments on the performance of externally occulted solar coronagraphs-Application to PROBA-3/ASPIICS

SV Shestov, AN Zhukov - Astronomy & Astrophysics, 2018 - aanda.org
Context. The ASPIICS instrument is a novel externally occulted coronagraph that will be
launched on board the PROBA-3 mission of the European Space Agency. The external …

Fine positioning algorithms for the ESA/PROBA-3 formation flying mission

M Casti, S Fineschi, A Bemporad… - 2019 IEEE 5th …, 2019 - ieeexplore.ieee.org
PROBA-3 is the forth of the PROBA technological mission designed by the European Space
Agency. The main purpose of PROBA-3 is to demonstrate the capabilities of two different …

PROBA-3 mission and the Shadow Position Sensors: Metrology measurement concept and budget

D Loreggia, S Fineschi, G Capobianco… - Advances in Space …, 2021 - Elsevier
PROBA-3 is a space mission of the European Space Agency that will test, and validate
metrology and control systems for autonomous formation flying of two independent satellites …

ASPIICS Shadow Position Sensors digital twin and illumination testbed

D Loreggia, G Capobianco, S Fineschi… - … on Space Optics …, 2023 - spiedigitallibrary.org
The PROBA-3 double-spacecraft formation flying mission of the European Space Agency
(ESA) has been presented in recent papers with details about the mission profile, the …