Coatings for automotive gray cast iron brake discs: A review

O Aranke, W Algenaid, S Awe, S Joshi - Coatings, 2019 - mdpi.com
Gray cast iron (GCI) is a popular automotive brake disc material by virtue of its high melting
point as well as excellent heat storage and damping capability. GCI is also attractive …

Recent research advances in plasma spraying of bulk-like dense metal coatings with metallurgically bonded lamellae

CJ Li, XT Luo, XY Dong, L Zhang, CX Li - Journal of thermal spray …, 2022 - Springer
Although thermal spray metallic coatings have been widely used for materials protection
from wear, corrosion and oxidation, its porous feature limits the full utilization of materials …

Influence of laser remelting on the microstructure and corrosion behavior of HVOF-sprayed Fe-based coatings on magnesium alloy

M Buchtík, M Hasoňová, P Horník, M Březina… - Materials …, 2022 - Elsevier
An HVOF-sprayed Fe-based (Diamalloy 1010) coating deposited on AZ91 magnesium alloy
was remelted using 650 W and 1000 W laser power. The microstructure of as-sprayed and …

Tribological behavior of HVOF-and HVAF-sprayed composite coatings based on Fe-Alloy+ WC–12% Co

G Bolelli, T Börner, A Milanti, L Lusvarghi… - Surface and Coatings …, 2014 - Elsevier
Fe-based coatings are promising alternatives to Ni-based ones, because of lower cost and
lower toxicity. Following a previous research, where the sliding wear resistance of HVOF …

Mechanical and microstructural properties of yttria-stabilized zirconia reinforced Cr3C2-25NiCr thermal spray coatings on steel alloy

S Singh, K Goyal, R Bhatia - Journal of Electrochemical Science and …, 2022 - hrcak.srce.hr
Sažetak In this research work, nano yttria-stabilized zirconia (YSZ) reinforced Cr3C2-25NiCr
composite coatings were prepared and successfully deposited on ASME-SA213-T-22 (T22) …

[HTML][HTML] Effect of heat treatments on the wear resistance of HVAF and HVOF sprayed tool steel coatings

T Varis, J Lagerbom, T Suhonen, L Raami… - Surface and Coatings …, 2023 - Elsevier
Iron-based coatings are an attractive solution for many wear applications, considering
sustainability requirements such as avoidance of critical raw materials and toxic substances …

Mechanical and microstructural properties of carbon nanotubes reinforced chromium oxide coated boiler steel

K Goyal, H Singh, R Bhatia - World Journal of Engineering, 2018 - emerald.com
Purpose The purpose of this study was to fabricate carbon nanotubes (CNT)-reinforced
chromium oxide coatings and investigate mechanical and microstructural properties of these …

Effect of Laser Remelting of Fe-Based Thermally Sprayed Coating on AZ91 Magnesium Alloy on Its Structural and Tribological Properties

M Buchtík, M Březina, L Mrňa, M Palán, J Filipenský… - Coatings, 2023 - mdpi.com
An Fe-based coating was thermally sprayed onto the surface of AZ91 magnesium alloy via
the High-Velocity-Oxygen-Fuel (HVOF) method. The thermally sprayed coating with a …

Microstructural and Tribological Characteristics of Composites Obtained by Detonation Spraying of Iron-Based Alloy—Carbide Powder Mixtures

F Azarmi, XW Tangpong - Materials, 2023 - mdpi.com
iron-based coatings have exhibited good mechanical properties, such as high hardness and
good wear resistance, which are desirable properties in applications such as automobile …

[PDF][PDF] FeCrBSiNb 非晶涂层的制备及其性能

梁秀兵, 王慧, 商俊超, 范建文, 陈永雄 - 中国表面工程, 2017 - qikan.cmes.org
采用火焰喷涂自制的FeCrBSiNb 气雾化合金粉末, 制备了高非晶含量的Fe 基非晶涂层. 利用X
射线衍射仪, 扫描电镜和透射电镜分析了粉末和涂层的相组织结构, 表面形貌和微观特征 …