Development and Performance of High Chromium White Cast Irons (HCWCIs) for Wear–Corrosive Environments: A Critical Review
S Fashu, V Trabadelo - Metals, 2023 - mdpi.com
There is a huge demand for high-performance materials in extreme environments involving
wear and corrosion. High chromium white cast irons (HCWCIs) display better performance …
wear and corrosion. High chromium white cast irons (HCWCIs) display better performance …
Microstructural effect and wear performance of high chromium white cast iron modified with high boron contents
A Bedolla-Jacuinde, FV Guerra, AJ Guerrero-Pastran… - Wear, 2021 - Elsevier
The present study discuss the effects systematic additions of boron (up to 1.197 wt%) on the
microstructure, bulk hardness and abrasive wear of a 17Cr–3C–1Ni–1Mo white cast iron …
microstructure, bulk hardness and abrasive wear of a 17Cr–3C–1Ni–1Mo white cast iron …
Effect of temperature on oxidation resistance and isothermal oxidation mechanism of novel wear-resistant Fe-Cr-B-Al-C-Mn-Si alloy
The effect of temperature on the oxidation resistance of a novel wear-resistant Fe-10Cr-1.5 B-
6Al-0.3 C-0.8 Mn-0.6 Si alloy is investigated. The mass growth rate shows that this alloy …
6Al-0.3 C-0.8 Mn-0.6 Si alloy is investigated. The mass growth rate shows that this alloy …
Load dependent microstructural evolution in an as-cast 26% Cr high chromium cast iron during unlubricated sliding
In the current study, an as-cast 26% Cr high chromium cast iron (HCCI) alloy was subjected
to dry-sliding linear wear tests, under different loads. The loads were selected based on …
to dry-sliding linear wear tests, under different loads. The loads were selected based on …
Time-dependant microstructural evolution and tribological behaviour of a 26 wt% Cr white cast iron subjected to a destabilization heat treatment
By employing destabilization heat treatments (HT), it is possible to create microstructures
possessing different fractions of carbides, martensite, and austenite, which lead to varying …
possessing different fractions of carbides, martensite, and austenite, which lead to varying …
The role of boron content in high alloy white cast iron (Ni-Hard 4) on microstructure, mechanical properties and wear resistance
High alloy white cast iron materials (Ni-Hard 4/ASTM A532) are widely used in cement,
concrete and mining industries due to high wear resistance. In this study, the effect of boron …
concrete and mining industries due to high wear resistance. In this study, the effect of boron …
Influence of tungsten on microstructure and wear resistance of iron base hardfacing alloy
DS Liu, RP Liu, YH Wei - Materials Science and Technology, 2014 - journals.sagepub.com
A series of iron based hardfacing alloys with varying tungsten contents were fabricated
using slag free self-shielded flux cored wire, and the effects of tungsten addition on …
using slag free self-shielded flux cored wire, and the effects of tungsten addition on …
Modifying effect of a new boron-barium ferroalloy on the wear resistance of low-chromium cast iron
D Aubakirov, A Issagulov, S Kvon, V Kulikov… - Metals, 2022 - mdpi.com
This paper presents the results of a study and analysis of the effect of modifying low-
chromium hypoeutectic cast iron with a new boron–barium ferroalloy on its properties—wear …
chromium hypoeutectic cast iron with a new boron–barium ferroalloy on its properties—wear …
Effect of carbide orientation during single scratch test in directionally solidified and heat-treated high chromium cast irons
LB Bergami, AO Lima, BN Venturelli, IF Machado… - Wear, 2023 - Elsevier
In this work, a billet of eutectic high chromium cast iron, material commonly used in highly
abrasive environments, such as in grinding and milling, was unidirectionally solidified. The …
abrasive environments, such as in grinding and milling, was unidirectionally solidified. The …
Influence of boron contents on oxidation behavior and the diffusion mechanism of Fe–B based alloys at 1073 K in air
The microstructure and oxidation behavior of Fe–B alloys have been investigated. Oxide
scale cross-sectional microstructures oxidized at 1073 K for 100 h have been studied. EPMA …
scale cross-sectional microstructures oxidized at 1073 K for 100 h have been studied. EPMA …