In view of the M n+ 1 AX n (MAX) phase coatings benefiting the adaptive passivation film for
good corrosion resistance and high electronic density of states for excellent electrical …

The effect of scanning speed (600–1200 mm/s) on the high-temperature oxidation
resistance and high-temperature mechanical properties of selective laser melting processed …

MoAlB is considered the most promising material for oxidation resistance among the MAB
phase family. However, the anisotropic oxidation mechanism at the atomic scale has not …

This work reveals the initial stages of Inconel 718 (IN718) oxidation manufactured by
selective laser melting (SLM). In-situ and ex-situ investigations were conducted on SLM …

Abstract Corrosion of 90Cu-10Ni alloy is related to oxide film formed in seawater. We
characterize the initial oxides formed on different grains immersed in alkaline NaCl solution …

The purpose of this paper is to provide a new understanding of the anisotropic corrosion
behavior of 90Cu-10Ni alloy. A clear correlation between grain orientations, SKPFM derived …

The effects of grain sizes on the oxidation behavior of the alloy 230 and alloy N were
investigated with the consideration of texture. The grain refinement process only had a slight …

Abstract The oxidation of Ni-Cr-Al model alloys was investigated after exposure to a 480° C
hydrogenated steam environment. Low angle grain boundaries (LAGBs) and the studied …

The metal-oxide interface of a commercial niobium (Nb) alloy showed clear presence of
'hills' and 'plateaus' on the metallic side. This interface morphology was orientation …

Ni-based superalloy Haynes 230 is used in many applications such as very high
temperature reactor (VHTR) or solid oxide fuel cells (SOFCs) where it is exposed to high …